The UCC5870-Q1-045 evaluation module is designed to test six channels of the UCC5870-Q1 gate drivers with TI address mode SPI communication, and has the option to configure the board for daisy chain mode SPI communication. The board can directly fit C2000 LaunchPad LAUNCHXL-F28379D, but also provides connectors for other type of controllers.

• 15-A peak split sink/source drive current for fast turn ON and turn OFF time
• Driver output voltages by default are +15V/-8V with 12-V input supply
• 3750-V_RMS one minute isolation per UL 1577 for UCC5870-Q1
• 3000-V_RMS one minute isolation for the flyback transformer
• > 8-mm creepage distance between primary and secondary
• Desat short-circuit protection and active Vce clamp
• Active miller clamp using internal or external FET
• Fault feedback and reset
• ADC for temperature sensing and DC bus voltage sensing
• Primary and secondary ASC
• Address mode or daisy chain mode SPI based device reconfiguration, verification, supervision and diagnosis
• Compatible with C2000 LaunchPad LAUNCHXL-F28379D

• Tightly-regulated, isolated output voltages of 15 V and –7.7 V with better than ±2% load regulation from 1% to 100% load