SBAA586 October   2023 AMC23C11 , UCC23513

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2System Challenge on Isolated Gate Drivers With Integrated DESAT
  6. 3System Approach With UCC23513 and AMC23C11
    1. 3.1 System Overview and Key Specification
    2. 3.2 Schematic Design
      1. 3.2.1 Circuit Schematic
      2. 3.2.2 Configure VCE(DESAT) Threshold and DESAT Bias Current
      3. 3.2.3 DESAT Blanking Time
      4. 3.2.4 DESAT Deglitch Filter
    3. 3.3 Reference PCB Layout
  7. 4Simulation and Test Results
    1. 4.1 Simulation Circuit and Results
      1. 4.1.1 Simulation Circuit
      2. 4.1.2 Simulation Results
    2. 4.2 Test Results With 3-Phase IGBT Inverter
      1. 4.2.1 Brake IGBT Test
      2. 4.2.2 Test Results on a 3-Phase Inverter With Phase to Phase Short
  8. 5Summary
  9. 6References
  10. 7Revision History

4.2 Test Results With 3-Phase IGBT Inverter

Tests have been conducted on a sample board of the proposed circuit on DESAT protection. Two cases were tested, in which the sample board was used as (1) the gate driver of a low-side brake IGBT, and (2) the gate driver of a high-side switch IGBT in a 3-phase motor drive inverter.