4 Pin Failure Mode Analysis (Pin FMA)

This section provides a Failure Mode Analysis (FMA) for the pins of the INA190-Q1. The failure modes covered in this document include the typical pin-by-pin failure scenarios:

• Pin short-circuited to Ground (see Table 4-2 and Table 4-6)
• Pin open-circuited (see Table 4-3 and Table 4-7)
• Pin short-circuited to an adjacent pin (see Table 4-4 and Table 4-8)
• Pin short-circuited to VS (see Table 4-5 and Table 4-9)

Table 4-2 through Table 4-9 also indicate how these pin conditions can affect the device as per the failure effects classification in Table 4-1.

Following are the assumptions of use and the device configuration assumed for the pin FMA in this section:

• T_A = -40°C to +125°C
• V_S = 1.8V to 5.0V
• V_IN+ = 12 V
• V_REF = V_S / 2