VCC | DAC Output Voltage | Output Current | Error | Maximum Resistive Load |
---|---|---|---|---|
5V | 0mV – 510mV | 0mA – 100mA | <0.25% FSR | 44.9Ω |
The programmable low-side current sink sets the current through a load based on the DAC output voltage. The current is sensed through RSET and the op amp biases a transistor regulate the current through the load. Components CF, RISO, and RFB provide compensation to verify the stability of the circuit.
Device | Key Features | Link | Other Possible Devices |
---|---|---|---|
DACs | |||
DAC60501 | 12-bit resolution, 1LSB INL, Single-Channel, Voltage Output DAC with 5ppm/°C Internal Reference | True 12-bit, 1-ch, SPI/I2C, voltage-output DAC in WSON package with precision internal reference | Precision DACs (≤10 MSPS) |
DAC80501 | 16-bit resolution, 1LSB INL, Single-Channel, Voltage Output DAC with 5ppm/°C Internal Reference | True 16-bit, 1-ch, SPI/I2C, voltage-output DAC in WSON package with precision internal reference | Precision DACs (≤10 MSPS) |
DAC8830 | 16-bit resolution, single channel, ultra-low power, unbuffered output, 1 LSB INL, SPI, 2.7V to 5.5V supply | 16-bit, single-channel, ultra-low power, voltage output DAC | Precision DACs (≤10 MSPS) |
Amplifiers | |||
TLV9061 | Ultra-Small, 0.3-mV Offset, Rail-to-Rail I/O, 1.8V to 5.5V supply | Single, 5.5V, 10MHz, RRIO operational amplifier for cost-optimized applications | Operational amplifiers (op amps) |
OPA317 | Zero-Drift, Low-Offset, Rail-to-Rail I/O, 35-µA supply current max, 2.5V to 5.5V supply | Low Offset, Rail-to-Rail I/O Operational Amplifier | Operational amplifiers (op amps) |
OPA388 | Precision, Zero-Drift, Zero-Crossover, Low Noise Rail-to-Rail I/O, 2.5V to 5.5V supply | Single, 10MHz, CMOS, zero-drift, zero-crossover, true RRIO precision operational amplifier | Operational amplifiers (op amps) |
All trademarks are the property of their respective owners.