SLAU909A September 2023 – December 2023 ULC1001
Please follow this order for connecting and setting up ULC-HPB-DEMO. To operate without viewing the camera, skip steps 2 and 3:
Table 5-1 describes the push button commands. Any mode can be stopped by pressing any button while the mode is running.
Label | Button Press | Description |
---|---|---|
W | Short | Runs one water cleaning sequence. |
A | Short | Enables auto sense mode. Begins by completing a new calibration sequence. Wait 6 seconds after button press to spray water onto lens. Runs until another button press. |
C | Short | Enables continuous water mode. Runs until another button press. |
I | Short | Runs de-ice sequence (40 seconds heating and expulsion). |
Long (3-seconds) | Runs de-fog sequence (20 seconds heating). | |
A+W | Long (3-seconds) | Runs calibration sequence. Can be run when system is not cleaning well. |