SLAZ754 December   2023 MSPM0L1304-Q1 , MSPM0L1305-Q1 , MSPM0L1306-Q1

 

  1.   1
  2.   Abstract
  3. 1Functional Advisories
  4. 2Preprogrammed Software Advisories
  5. 3Debug Only Advisories
  6. 4Fixed by Compiler Advisories
  7. 5Device Nomenclature
    1. 5.1 Device Symbolization and Revision Identification
  8. 6Advisory Descriptions
    1. 6.1  ADC_ERR_01
    2. 6.2  ADC_ERR_02
    3. 6.3  COMP_ERR_01
    4. 6.4  GPIO_ERR_01
    5. 6.5  I2C_ERR_01
    6. 6.6  IO_ERR_01
    7. 6.7  PMCU_ERR_01
    8. 6.8  PMCU_ERR_02
    9. 6.9  PMCU_ERR_03
    10. 6.10 PWREN_ERR_01
    11. 6.11 SPI_ERR_01
    12. 6.12 SYSOSC_ERR_01
  9. 7Revision History

6.3 COMP_ERR_01

Comparator output keeps toggling in STANDBY0 mode

Revisions Affected

Rev C

Details

When the comparator inverting input mux (IMSEL) is set to 0 (COMP0_IN0-), and the device operating mode is set to STANDBY0, the comparator output may toggle unexpectedly regardless of the applied input voltages to the comparator.

Workaround

If utilizing comparator in STANDBY0, and applying an external voltage to the negative terminal, utilize channel 1 of the comparator (IMSEL = 1).

If utilizing comparator in STANDBY0, and applying an internal reference voltage (DAC8, VREF, etc.), set IMSEL to a value other than 0 (IMSEL ≠ 0).