5 Revision History
Changes from Revision D (September 2021) to Revision E (July 2022)
- Changed Recommended Operating ConditionsGo
- Changed
EquipmentGo
- Changed Software SetupGo
- Changed Initial SettingsGo
- Changed Communication VerificationGo
- Changed OTG Mode VerificationGo
- Updated Figure 4-7
Go
Changes from Revision C (June 2021) to Revision D (September 2021)
- Updated Equipment Test Setup for Testing Battery Charging
image.Go
Changes from Revision B (December 2020) to Revision C (June 2021)
- Changed BQ25796EVM to BQ25798BKUPEVMGo
- Removed BQ25796 and added BQ25798BKUPEVM Go
- Deleted BQ25796. Go
- Removed BQ25796Go
- Corrected typos in JP9, JP14 and JP31 descriptionsGo
- Removed BQ25796Go
- Renamed BQ25796EVM to BQ25798BKUPEVMGo
- Updated Figure 4-7
Go
- For C22,C34, changed reference to BQ25798BKUPEVM and part
numberGo
Changes from Revision A (September 2020) to Revision B (December 2020)
- Added BQ25796 and BQ25798 features and data sheet literature
numbersGo
- Updated description for JP1, JP2, JP5, JP8, and JP9
shuntsGo
- Deleted EVM revision E2 text. Added BQ25796 schematic and reference
to BQ25798 schematic. Go
- Updated existing BOM to include BQ25796EVM componentsGo
Changes from Revision * (June 2020) to Revision A (September 2020)
- Deleted BQ25795EVMGo
- Deleted BQ25795. Go
- Deleted BQ25795EVM from text and tableGo
- Deleted BQ25795EVMGo
- Updated Equipment Test Setup for Testing Battery Charging
image.Go
- Updated BMS034E2/A Top Layer image.Go
- Changed BMS034E1 to BMS034E2/A.Go
- Updated both schematic images.Go
- Updated from BMS034E1 to BMS034E2/AGo
- Updated C37, D3 and D7 to non-populated Go
- Added D3, D4, D7 and D8 to MBR130T1GGo