SLUUCF8 March   2021 TPS53676

 

  1.   Trademarks
  2. 1 Introduction
  3. 2 Features
  4. 3 Applications
  5. 4 System Description
    1. 4.1 Phase configuration selection
    2. 4.2 Jumper details
    3. 4.3 On-board load transient
  6. 5 Test Equipment
  7. 6 Test Procedure
    1. 6.1 Start-up Test
    2. 6.2 Shut down Test
    3. 6.3 Steady-state Test
    4. 6.4 Load Transient Test
    5. 6.5 Efficiency Plot
    6. 6.6 Bode plot
  8. 7 Fusion GUI
  9. 8 Evaluation Module (EVM) Hardware
  10. 9 Schematic and Bill of Materials
  11. 10Read This First
    1. 10.1 About This Manual
    2. 10.2 Glossary
    3. 10.3 Related Documentation
    4. 10.4 Support Resources

6 Test Procedure

All the below tests are done with 6+1 configuration. So, refer to Table 4-2 for jumper setting selection and keep same jumper positions (J10, J11, J12 and J13) for the following tests.