SLUUCP4 August   2022 TPS92620-Q1

 

  1.   Abstract
  2.   Trademarks
  3. 1Introduction
    1. 1.1 Features
    2. 1.2 Typical Application
  4. 2TPS92620Q1EVM Description
    1. 2.1 Connector Map
    2. 2.2 Jumper Map
  5. 3Test Setup
  6. 4Schematic, Bill of Materials, and Layout
    1. 4.1 Schematic
    2. 4.2 Bill of Materials (BOM)
    3. 4.3 Layout

2.1 Connector Map

The EVM has the following connectors. Table 2-1 shows their functions.

Table 2-1 Connector Map
ConnectorDescription
Vbat1This connector is the positive input supply voltage.
GND1This connector is TPS92620-Q1 EVM ground.
TP1This connector is LED part ground.
TP2Vbat. This connector can show the positive input supply voltage.
TP3Fault. This connector is the FAULT status output of the LED driver.