SLUUCY9 November   2023 BQ76905

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Before You Begin
    2. 2.2 Required Equipment
    3. 2.3 BQ76905 Circuit Module Use
      1. 2.3.1 Cell Simulator
      2. 2.3.2 Evaluating with Load Current
      3. 2.3.3 Evaluating Charge and Discharge Currents
      4. 2.3.4 Evaluating with Simulated Current
      5. 2.3.5 Reducing the Cell Count
      6. 2.3.6 Connecting Cells
      7. 2.3.7 Connecting to a Host
      8. 2.3.8 Hardware Configuration
        1. 2.3.8.1 Configuration Jumpers
      9. 2.3.9 Configuration Register Programming
  9. 3Quick Start Guide
  10. 4Software
    1. 4.1 Battery Management Studio Software
      1. 4.1.1 System Requirements
      2. 4.1.2 Installing BQStudio
      3. 4.1.3 BQ76905 bqz File Installation
      4. 4.1.4 BQStudio Operation and Registers View
      5. 4.1.5 Commands
      6. 4.1.6 Data Memory
        1. 4.1.6.1 Entering, Saving, and Loading Configuration
      7. 4.1.7 Command Sequences
  11. 5Hardware Design Files
    1. 5.1 Schematic
    2. 5.2 Board Layout
    3. 5.3 Bill of Materials
  12. 6Additional Information
    1.     Trademarks

1.4 Device Information

Table 1-2 Device Information
EVM Part NumberChemistryConfigurationCapacity
BQ76905EVMLi-Ion5 cellsAny
Note: Although capacity is shown as Any, practical limits of the physical construction of the module typically limits the operation of the EVM to a 1P or 2P battery construction. Refer to the physical construction section for board details.