SLVU743A September   2012  – June 2021 TPS62175 , TPS62177

 

  1. 1Introduction
    1. 1.1 Background
    2. 1.2 Performance Specification
    3. 1.3 Modifications
      1. 1.3.1 Fixed Output Voltage Operation
      2. 1.3.2 Input and Output Capacitors
      3. 1.3.3 Loop Response Measurement
  2. 2Setup
    1. 2.1 Input/Output Connector Descriptions
    2. 2.2 Setup
  3. 3TPS62175EVM-098 Test Results
  4. 4Board Layout
  5. 5Schematic and Bill of Materials
    1. 5.1 Schematic
    2. 5.2 Bill of Materials
  6. 6Revision History

2.2 Setup

To operate the EVM, set jumpers JP1 through JP3 to the desired positions per Section 2.1. Connect the input supply to J1 and J3 and connect the load to J4 and J6.