SNLA437 December   2023 DP83822H , DP83822HF , DP83822I , DP83822IF , DP83826I

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1DP83822 Application Overview
  5. 2Troubleshooting the PHY Application
    1. 2.1  Schematic and Layout Checklist
    2. 2.2  Verify Successful Power-up of PHY
    3. 2.3  Read and Check Register Values
    4. 2.4  Peripheral Pin Checks
      1. 2.4.1 Probe the RESET_N Signal
      2. 2.4.2 Probe the RBIAS pin
      3. 2.4.3 Probe the Serial Management Interface (MDC, MDIO) Signals
      4. 2.4.4 Probe the MDI Signals
    5. 2.5  Verifying Strap Configurations During Initialization
    6. 2.6  Debugging Link Quality
    7. 2.7  Built-In Self Test With Various Loopback Modes
    8. 2.8  Debug the Fiber Connection
    9. 2.9  Debug the MAC Interface
    10. 2.10 Debug the Start of Frame Detect
    11. 2.11 Tools and References
      1. 2.11.1 DP83822 Register Access
      2. 2.11.2 Extended Register Access
      3. 2.11.3 Software and Driver Debug on Linux
        1. 2.11.3.1 Common Terminal Outputs and Solutions
  6. 3References

2.1 Schematic and Layout Checklist

Reference and verify all of the noted schematic and layout recommendations in the DP83822 Product Page in the Design and Development section. A strap tool with all the available strap configurations as well as a pin-wise checklist is included in the schematic checklist spreadsheet. The checklist contains special cells with a dropdown menu that are shaded light orange, enabling you to select the desired strap configurations and provides the desired components and schematics in the pin-wise checklist.