SNOU164B September   2018  – June 2024 TLV4021 , TLV4041

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 How to Use the TLV40x1EVM for Evaluation or System Prototypes
      1. 2.1.1 Usage Example
  7. 3Hardware Design Files
    1. 3.1 TLV40x1EVM Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  8. 4Additional Information
    1. 4.1 Trademarks
  9. 5Revision History

2.1 How to Use the TLV40x1EVM for Evaluation or System Prototypes

The TLV40x1EVM quadrant is assembled with the TLV40x1 device, a 0.1µF ceramic capacitor (in 0603 package), and a 100kΩ pull-up resistor (only for Quadrants I and II). If the application needs to scale down the input voltage to a lower value, a pair of resistors R1 and R2 can be installed by the user. In this case, connect the voltage to be monitored to IN_AUX (DIP PIN 7) instead of IN (DIP PIN 8).

Depending on the user’s setup or requirement, a standard 8-pin DIP socket or 0.1-inch pin headers can be installed. Users can also solder wires directly to the DIP holes.