SPRADE8A November   2023  – April 2024 TMS320F28P650DH , TMS320F28P650DK , TMS320F28P650SH , TMS320F28P650SK , TMS320F28P659DH-Q1 , TMS320F28P659DK-Q1 , TMS320F28P659SH-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1 Introduction
  5. 2 Difference Between EEPROM and On-Chip Flash
  6. 3 Overview
    1. 3.1 Basic Concept
    2. 3.2 Single-Unit Method
    3. 3.3 Ping-Pong Method
    4. 3.4 Creating EEPROM Sections (Pages) and Page Identification
  7. 4 Software Description
    1. 4.1 Software Functionality and Flow
  8. 5 Ping-Pong Emulation
    1. 5.1 User-Configuration
      1. 5.1.1 EEPROM_PingPong_Config.h
      2. 5.1.2 F28P65x_EEPROM_PingPong.c
    2. 5.2 EEPROM Functions
      1. 5.2.1  EEPROM_Config_Check
      2. 5.2.2  Configure_Protection_Masks
      3. 5.2.3  EEPROM_Write
      4. 5.2.4  EEPROM_Read
      5. 5.2.5  EEPROM_Erase
        1. 5.2.5.1 Erase_Bank
      6. 5.2.6  EEPROM_GetValidBank
      7. 5.2.7  EEPROM_UpdateBankStatus
      8. 5.2.8  EEPROM_UpdatePageStatus
      9. 5.2.9  EEPROM_UpdatePageData
      10. 5.2.10 EEPROM_Get_64_Bit_Data_Address
      11. 5.2.11 EEPROM_Program_64_Bits
      12. 5.2.12 EEPROM_CheckStatus
      13. 5.2.13 ClearFSMStatus
    3. 5.3 Testing Example
  9. 6 Single-Unit Emulation
    1. 6.1 User-Configuration
      1. 6.1.1 EEPROM_Config.h
      2. 6.1.2 F28P65x_EEPROM.c
    2. 6.2 EEPROM Functions
      1. 6.2.1  EEPROM_Config_Check
      2. 6.2.2  Configure_Protection_Masks
      3. 6.2.3  EEPROM_Write
      4. 6.2.4  EEPROM_Read
      5. 6.2.5  EEPROM_Erase
      6. 6.2.6  EEPROM_GetValidBank
      7. 6.2.7  EEPROM_Get_64_Bit_Data_Address
      8. 6.2.8  EEPROM_UpdateBankStatus
      9. 6.2.9  EEPROM_UpdatePageStatus
      10. 6.2.10 EEPROM_UpdatePageData
      11. 6.2.11 EEPROM_Get_64_Bit_Data_Address
      12. 6.2.12 EEPROM_Program_64_Bits
      13. 6.2.13 EEPROM_CheckStatus
      14. 6.2.14 ClearFSMStatus
    3. 6.3 Testing Example
  10. 7 Application Integration
  11. 8 Adapting to Other Gen 3 C2000 MCUs
  12. 9 Flash API
    1. 9.1 Flash API Checklist
      1. 9.1.1 Flash API Do's and Do Not's
  13. 10Source File Listing
  14. 11Troubleshooting
    1. 11.1 General
  15. 12Conclusion
  16. 13References
  17. 14Revision History

6.2.13 EEPROM_CheckStatus

The EEPROM_CheckStatus function provides functionality to check the Flash API status and check the Flash State Machine status after each program/erase to Flash. If any unexpected statuses are detected, the program stops. Error handling is not implemented in this project.

Fapi_FlashStatusType  oFlashStatus;
Fapi_FlashStatusWordType oFlashStatusWord;

uint32_t sectorAddress = FLASH_BANK_SELECT + FIRST_AND_LAST_SECTOR[0] * FLASH_SECTOR_SIZE;
uint16_t sectorSize = (FIRST_AND_LAST_SECTOR[1] - FIRST_AND_LAST_SECTOR[0] + 1) * (FLASH_SECTOR_SIZE / 2);

// Wait until the Flash program operation is over
while(Fapi_checkFsmForReady() == Fapi_Status_FsmBusy);

if(*oReturnCheck != Fapi_Status_Success)
{
    // Check Flash API documentation for possible errors
    Sample_Error();
}


// Read FMSTAT register contents to know the status of FSM after
// program command to see if there are any program operation related
// errors
oFlashStatus = Fapi_getFsmStatus();
if (Erase_Inactive_Unit && Erase_Blank_Check){
        *oReturnCheck = Fapi_doBlankCheck((uint32_t *) sectorAddress,
                                          sectorSize, &oFlashStatusWord);
        Erase_Blank_Check = 0;
}
if(*oReturnCheck != Fapi_Status_Success || oFlashStatus != 3)
{
    //Check FMSTAT and debug accordingly
    Sample_Error();
}