SPRUJ42E March 2022 – October 2024 AM2631 , AM2631-Q1 , AM2632 , AM2632-Q1 , AM2634 , AM2634-Q1
PRODUCTION DATA
Clock Management Configuration Register.
Return to Summary Table
Instance Name | Physical Address |
---|---|
MMCSD0 | 4830 0010h |
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 |
RESERVED | |||||||
R | |||||||
0h | |||||||
23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
RESERVED | |||||||
R | |||||||
0h | |||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
RESERVED | |||||||
R | |||||||
0h | |||||||
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RESERVED | STANDBYMODE | IDLEMODE | FREEEMU | SOFTRESET | |||
R | R/W | R/W | R/W | R/W | |||
0h | 2h | 2h | 0h | 0h |
Bit | Field | Type | Reset | Description |
---|---|---|---|---|
31:6 | RESERVED | R | 0h | |
5:4 | STANDBYMODE | R/W | 2h | Configuration of the local initiator state management mode. By definition, initiator may generate read/write transaction as long as it is out of STANDBY state. 3 Smart-Standby wakeup-capable mode: local initiator standby status depends on local conditions, i.e. the module's functional requirement from the initiator. IP module may generate (master-related) wakeup events when in standby state.Mode is only relevant if the appropriate IP module "mwakeup" output is implemented. 2 Smart-standby mode: local initiator standby status depends on local conditions, i.e. the module's functional requirement from the initiator.IP module shall not generate (initiator-related) wakeup events. 1 No-standby mode: local initiator is unconditionally placed out of standby state.Backup mode, for debug only. 0 Force-standby mode: local initiator is unconditionally placed in standby state.Backup mode, for debug only. |
3:2 | IDLEMODE | R/W | 2h | Configuration of the local target state management mode. By definition, target can handle read/write transaction as long as it is out of IDLE state. 3 Smart-idle wakeup-capable mode: local target's idle state eventually follows (acknowledges) the system's idle requests, depending on the IP module's internal requirements.IP module may generate (IRQ- or DMA-request-related) wakeup events when in idle state.Mode is only relevant if the appropriate IP module "swakeup" output(s) is (are) implemented. 2 Smart-idle mode: local target's idle state eventually follows (acknowledges) the system's idle requests, depending on the IP module's internal requirements.IP module shall not generate (IRQ- or DMA-request- related) wakeup events. 1 No-idle mode: local target never enters idle state.Backup mode, for debug only. 0 Force-idle mode: local target's idle state follows (acknowledges) the system's idle requests unconditionally, i.e. regardless of the IP module's internal requirements.Backup mode, for debug only. |
1 | FREEEMU | R/W | 0h | Sensitivity to emulation [debug] suspend input signal. Functionality NOT implemented in MMCSD. 1 IP module is not sensitive to emulation suspend 0 IP module is sensitive to emulation suspend |
0 | SOFTRESET | R/W | 0h | Software reset. [Optional] 1 Reset (software or other) ongoing 1 Initiate software reset 0 No action 0 Reset done, no pending action |