This user’s guide presents an overview of the DLP®LightCrafter™ Display 3010 evaluation module (EVM) Gen2 and a general description of the main features and functions. It explains the first steps to get started, and shows a detailed description of on board LEDs, connectors and overall EVM assembly. It will give the user a successful start with their first DLP LightCrafter Display 3010 Gen2 evaluation module.
LightCrafter is a registered trademark of Texas Instruments.
LightCrafter, E2E are registered trademarks of TI.
DLP is a registered trademark of TI.
All other trademarks are the property of their respective owners.
In addition to this document, the following documents shown in Section 3 should be used.
CAUTION
Caution hot surface. Contact may cause burns. Do not touch.
WARNING
Possible hazardous optical radiation emitted from this product. Do not stare at the operating lamp. May be harmful to the eye.
WARNING
Observe handling precautions. Electrostatic sensitive devices.
WARNING
Always ensure both fans are running during operation to avoid overheating and ensure reliable operation.