The TPS281C30EVM is a hardware evaluation module (EVM) used to enable hardware engineers to evaluate the full performance and functionality of the TPS281C30 industrial high side switch. The TPS281C30EVM contains everything needed to test and assess the TPS281C30 before designing it into part of a greater application's power system. The evaluation module is designed to either be used as a standalone board with an attached voltage supply and output load or in conjunction with an underlying Texas Instruments microcontroller by using the standardized BoosterPack™ plug-in module headers. A wide range of application features such as digital output module, safe torque off (STO), and holding brake are enabled and visible through use of this evaluation module. This EVM is populated with the QFN version of TPS281C30.
![]() |
|
|
BoosterPack™ and LaunchPad™ are trademarks of Texas Instruments.
All trademarks are the property of their respective owners.
The Texas Instruments TPS281C30EVM is an evaluation module that is used to demonstrate and showcase all of the features of the underlying TPS281C30 industrial high side switch. This evaluation board provides a seamless way to connect a set of power supplies to the inputs of the TPS281C30, connect loads to the output channels, and switch on and off the device using the control pins of the chip itself. An on-board 3.3-V LDO is included on the EVM to simplify controlling signals to the TPS281C30 and easily assert and deassert logic signals by the use of a set of external hardware jumpers. Additionally, this EVM includes BoosterPack plug-in module headers allowing the user to easily connect the TPS281C30 high side switch to an underlying microcontroller and write software to control and configure the device.
Features of the TPS281C30EVM include: