The LMV60x devices are single, dual, and quad low-voltage, low-power operational amplifiers. They are designed specifically for low-voltage, general-purpose applications. Other important product characteristics are low input bias current, rail-to-rail output, and wide temperature range. The LMV60x have 29-nV voltage noise at 10 KHz, 1-MHz GBW, 1-V/µs slew rate, 0.25-mV Vos. The LMV60x operates from a single supply voltage as low as 2.7 V, while drawing 100-µA (typical) quiescent current. In shutdown mode, the current can be reduced to 45 pA.
The industrial-plus temperature range of −40°C to 125°C allows the LMV60x to accommodate a broad range of extended environment applications.
The LMV601 offers a shutdown pin that can be used to disable the device. Once in shutdown mode, the supply current is reduced to 45 pA (typical).
The LMV601 is offered in the tiny 6-pin SC70 package, the LMV602 in space-saving 8-pin VSSOP and SOIC, and the LMV604 in 14-pin TSSOP and SOIC. These small package amplifiers offer an ideal solution for applications requiring minimum PCB footprint. Applications with area constrained printed-circuit board requirements include portable and battery-operated electronics.
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
---|---|---|
LMV601 | SC70 (6) | 2.00 mm × 1.25 mm |
LMV602 | SOIC (8) | 4.90 mm × 3.91 mm |
VSSOP (8) | 3.00 mm × 3.00 mm | |
LMV604 | SOIC (8) | 4.90 mm × 3.91 mm |
TSSOP (14) | 5.00 mm × 4.40 mm |
Changes from B Revision (March 2013) to C Revision
Changes from A Revision (March 2012) to B Revision
PIN | I/O | DESCRIPTION | |
---|---|---|---|
NAME | NO. | ||
GND | 2 | P | Supply negative input |
+IN | 1 | I | Noninverting input |
–IN | 3 | I | Inverting input |
OUT | 4 | O | Output |
SHDN | 5 | I | Active low enable input |
V+ | 6 | P | Positive supply input |
PIN | I/O | DESCRIPTION | ||
---|---|---|---|---|
NAME | NO. | |||
LMV602 | LMV604 | |||
+INA | 3 | 3 | I | Noninverting input, channel A |
+INB | 5 | 5 | I | Noninverting input, channel B |
+INC | — | 10 | I | Noninverting input, channel C |
+IND | — | 12 | I | Noninverting input, channel D |
–INA | 2 | 2 | I | Inverting input, channel A |
–INB | 6 | 6 | I | Inverting input, channel B |
–INC | — | 9 | I | Inverting input, channel C |
–IND | — | 13 | I | Inverting input, channel D |
OUTA | 1 | 1 | O | Output, channel A |
OUTB | 7 | 7 | O | Output, channel B |
OUTC | — | 8 | O | Output, channel C |
OUTD | — | 14 | O | Output, channel D |
V+ | 8 | 4 | P | Positive (highest) power supply |
V– | 4 | 11 | P | Negative (lowest) power supply |