Startseite Datenwandler Analog-Digital-Wandler (ADCs) Präzisions-ADCs
Startseite
Datenwandler
Analog-Digital-Wandler (ADCs)
Präzisions-ADCs

ADS1259-Q1

AKTIV

24-Bit-, 14,4-kSPS-, 1-Kanal-Delta-Sigma-ADC mit Low-Drift-Vref für Systeme mit hohem Dynamikbereich

Jetzt bestellen
Datenblatt

ADS1259-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Resolution (Bits) 24 Sample rate (max) (ksps) 14.4 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Automotive Reference mode External, Internal Input voltage range (max) (V) 2.75, 5.35 Input voltage range (min) (V) -2.7, 0 Features 50/60 Hz Rejection, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 13 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
Resolution (Bits) 24 Sample rate (max) (ksps) 14.4 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Automotive Reference mode External, Internal Input voltage range (max) (V) 2.75, 5.35 Input voltage range (min) (V) -2.7, 0 Features 50/60 Hz Rejection, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 13 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Temperature Grade 1: –40°C to 125°C
    • HBM ESD Classification 2
    • CDM ESD Classification C4B
  • Programmable Data Rates: 10 SPS to 14.4 kSPS
  • Single-Cycle Settling Digital Filter
  • High Performance:
    • 21.3 ENOB at 1.2 kSPS
    • INL: 3 ppm
    • Offset Drift: 0.05 µV/°C
    • Gain Drift: 0.5 ppm/°C
  • Internal Reference: 2.5 V, 10 ppm/°C Drift
  • Internal 2% Accurate Oscillator
  • Input Signal Out-of-Range Detection
  • Optional Checksum and Redundant Data-Read Capability
    to Augment Data Integrity
  • SPI-Compatible Interface, Mode 1
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 2.7 V to 5 V
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Temperature Grade 1: –40°C to 125°C
    • HBM ESD Classification 2
    • CDM ESD Classification C4B
  • Programmable Data Rates: 10 SPS to 14.4 kSPS
  • Single-Cycle Settling Digital Filter
  • High Performance:
    • 21.3 ENOB at 1.2 kSPS
    • INL: 3 ppm
    • Offset Drift: 0.05 µV/°C
    • Gain Drift: 0.5 ppm/°C
  • Internal Reference: 2.5 V, 10 ppm/°C Drift
  • Internal 2% Accurate Oscillator
  • Input Signal Out-of-Range Detection
  • Optional Checksum and Redundant Data-Read Capability
    to Augment Data Integrity
  • SPI-Compatible Interface, Mode 1
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 2.7 V to 5 V

The ADS1259-Q1 is a precision, low-drift, 24-bit, analog-to-digital converter (ADC). The device can perform conversions at data rates up to 14.4 kSPS with high resolution and is therefore ideally suited to measure rapidly changing signals that have a wide dynamic range. An integrated low-noise, low-drift 2.5-V reference eliminates the need for an external voltage reference, thus reducing system cost and component count.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise performance and linearity. The device can use the integrated oscillator, an external crystal, or an external clock as the ADC clock source.

A fast-responding input overrange detector flags the conversion data if an input overrange event occurs. To augment data integrity in noisy automotive environments the ADS1259-Q1 offers an optional checksum byte and a redundant conversion data-read capability.

The ADS1259-Q1 consumes 13 mW during operation and less than 25 µW when powered down. TI offers the ADS1259-Q1 device in a TSSOP-20 package with full specification from –40°C to 125°C.

The ADS1259-Q1 is a precision, low-drift, 24-bit, analog-to-digital converter (ADC). The device can perform conversions at data rates up to 14.4 kSPS with high resolution and is therefore ideally suited to measure rapidly changing signals that have a wide dynamic range. An integrated low-noise, low-drift 2.5-V reference eliminates the need for an external voltage reference, thus reducing system cost and component count.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise performance and linearity. The device can use the integrated oscillator, an external crystal, or an external clock as the ADC clock source.

A fast-responding input overrange detector flags the conversion data if an input overrange event occurs. To augment data integrity in noisy automotive environments the ADS1259-Q1 offers an optional checksum byte and a redundant conversion data-read capability.

The ADS1259-Q1 consumes 13 mW during operation and less than 25 µW when powered down. TI offers the ADS1259-Q1 device in a TSSOP-20 package with full specification from –40°C to 125°C.
filter Andere Präzisions-ADCs suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet Automotive, 14.4-kSPS, 24-Bit ADC with Integrated Low-Drift Reference datasheet 19 Mär 2014

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​