Startseite Datenwandler Analog-Digital-Wandler (ADCs) Präzisions-ADCs
Startseite
Datenwandler
Analog-Digital-Wandler (ADCs)
Präzisions-ADCs

ADS8284

NICHT FÜR NEUE DESIGNS EMPFOHLEN

18 Bit, 1 MSPS, 4 Kanäle, Pseudo-bipolarer differenzieller ADC mit integriertem ADC-Treiber-OPA

Jetzt bestellen
Datenblatt
ADS8284 wird nicht für neue Designs empfohlen
Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.
open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
ADS8382 AKTIV Serieller ADC, 18 Bit, 600 KSPS mit Ref und pseudo-bipolarem, vollständig differenziellem Eingang Lower sampling rate (600 kSPS)

ADS8284

NICHT FÜR NEUE DESIGNS EMPFOHLEN
Datenblatt Jetzt bestellen

Produktdetails

Resolution (Bits) 18 Sample rate (max) (ksps) 1000 Number of input channels 4 Interface type Parallel Architecture SAR Rating Catalog Reference mode External, Internal Operating temperature range (°C) -40 to 85 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 SNR (dB) 97.5 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
Resolution (Bits) 18 Sample rate (max) (ksps) 1000 Number of input channels 4 Interface type Parallel Architecture SAR Rating Catalog Reference mode External, Internal Operating temperature range (°C) -40 to 85 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 SNR (dB) 97.5 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
VQFN (RGC) 64 81 mm² 9 x 9
  • 1.0-MHz Sample Rate, Zero Latency at Full Speed
  • 18-Bit Resolution
  • Supports Pseudo-Bipolar Differential Input Range:
    -4 V to +4 V with 2-V Common-Mode
  • Built-In Four Channel, Differential Ended Multiplexer;
    with Channel Count Selection and Auto/Manual Mode
  • On-Board Differential ADC Driver (OPA)
  • Buffered Reference Output to Level Shift Bipolar
    ±4-V Input with External Resistance Divider
  • Reference/2 Output to Set Common-Mode for External
    Signal Conditioner
  • 18-/16-/8-Bit Parallel Interface
  • SNR: 98.4dB Typ at 2-kHz I/P
  • THD: –119dB Typ at 2-kHz I/P
  • Power Dissipation: 331.25 mW at 1 MSPS Including
    ADC Driver
  • Internal Reference
  • Internal Reference Buffer
  • 64-Pin QFN Package
  • 1.0-MHz Sample Rate, Zero Latency at Full Speed
  • 18-Bit Resolution
  • Supports Pseudo-Bipolar Differential Input Range:
    -4 V to +4 V with 2-V Common-Mode
  • Built-In Four Channel, Differential Ended Multiplexer;
    with Channel Count Selection and Auto/Manual Mode
  • On-Board Differential ADC Driver (OPA)
  • Buffered Reference Output to Level Shift Bipolar
    ±4-V Input with External Resistance Divider
  • Reference/2 Output to Set Common-Mode for External
    Signal Conditioner
  • 18-/16-/8-Bit Parallel Interface
  • SNR: 98.4dB Typ at 2-kHz I/P
  • THD: –119dB Typ at 2-kHz I/P
  • Power Dissipation: 331.25 mW at 1 MSPS Including
    ADC Driver
  • Internal Reference
  • Internal Reference Buffer
  • 64-Pin QFN Package

The ADS8284 is a high-performance analog system-on-chip (SoC) device with an 18-bit, 1-MSPS A/D converter, 4-V internal reference, an on-chip ADC driver (OPA), and a 4-channel differential multiplexer. The channel count of the multiplexer and auto/manual scan modes of the device are user selectable.

The ADC driver is designed to leverage the very high noise performance of the differential ADC at optimum power usage levels.

The ADS8284 outputs a buffered reference signal for level shifting of a ±4-V bipolar signal with an external resistance divider. A Vref/2 output signal is available to set the common-mode of a signal conditioning circuit. The device also includes an 18-/16-/8-bit parallel interface.

The ADS8284 is available in a 9 mm × 9 mm, 64-pin QFN package and is characterized from -40°C to 85°C.

For all available packages, see the orderable addendum at the end of the data sheet.

The ADS8284 is a high-performance analog system-on-chip (SoC) device with an 18-bit, 1-MSPS A/D converter, 4-V internal reference, an on-chip ADC driver (OPA), and a 4-channel differential multiplexer. The channel count of the multiplexer and auto/manual scan modes of the device are user selectable.

The ADC driver is designed to leverage the very high noise performance of the differential ADC at optimum power usage levels.

The ADS8284 outputs a buffered reference signal for level shifting of a ±4-V bipolar signal with an external resistance divider. A Vref/2 output signal is available to set the common-mode of a signal conditioning circuit. The device also includes an 18-/16-/8-bit parallel interface.

The ADS8284 is available in a 9 mm × 9 mm, 64-pin QFN package and is characterized from -40°C to 85°C.

For all available packages, see the orderable addendum at the end of the data sheet.
filter Andere Präzisions-ADCs suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet 18-Bit, 1-MSPS, Pseudo-Bipolar Differential SAR ADC with On-Chip ADC Driver (OP datasheet (Rev. A) 23 Apr 2014

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort