All trademarks are the property of their respective owners.
Texas Instruments' Comlinear CLC006 is a monolithic, high-speed cable driver designed for the SMPTE 259M serial digital video data transmission standard. The CLC006 drives 75Ω transmission lines (Belden 8281 or equivalent) at data rates up to 400 Mbps. Controlled output rise and fall times (650 ps typical) minimize transition-induced jitter. The output voltage swing, typically 1.65V, set by an accurate, low-drift internal bandgap reference, delivers an 800 mV swing to back-matched and terminated 75Ω cable. Output swing is adjustable from 0.7 VP-P to 2 VP-P using external resistors.
The CLC006’s class AB output stage consumes less power than other designs, 185 mW with both outputs terminated, and requires no external bias resistors. The differential inputs accept a wide range of digital signals from 200 mVP-P to ECL levels within the specified common-mode limits. All this make the CLC006 an excellent general purpose high speed driver for digital applications.
The CLC006 is powered from a single +5V or −5.2V supply and comes in an 8-pin SOIC package.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | CLC006 Serial Digital Cable Driver with Adjustable Outputs datasheet (Rev. G) | 12 Apr 2013 | |
| Application note | AN-1943 Understanding Serial Digital Video Bit Rates (Rev. A) | 26 Apr 2013 | ||
| Application note | AN-2145 Power Considerations for SDI Products (Rev. B) | 26 Apr 2013 | ||
| Application note | AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A) | 26 Apr 2013 | ||
| Application note | High-Speed Board Layout Challenges in FPGA/SDI Sub-Systems | 12 Nov 2009 | ||
| Application note | AD-04 Reducing the power Requirements of Comlinear CLC949 support Circuitry | 14 Mai 2004 | ||
| Application note | Use Video Standards for Eye-Opening Data Transmission: Mega-bits @ Many Meters | 29 Dez 1999 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.