> 25-Year Life at Rated Working Voltage (see Isolation Lifetime Projection)
The ISO7240x, ISO7241x, and ISO7242x devices are quad-channel digital isolators with multiple channel configurations and output-enable functions. These devices have logic-input and logic-output buffers separated by Texas Instrument’s silicon-dioxide (SiO2) isolation barrier. Used in conjunction with isolated power supplies, these devices help block high voltage, isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging sensitive circuitry.
The ISO7240x family of devices has all four channels in the same direction. The ISO7241x family of devices has three channels in the same direction and one channel in the opposition direction. The ISO7242x family of devices has two channels in each direction.
The devices with the C suffix (C option) have TTL input thresholds and a noise-filter at the input that prevents transient pulses from being passed to the output of the device. The devices with the M suffix (M option) have CMOS VCC/2 input thresholds and do not have the input noise filter or the additional propagation delay.
The ISO7240CF device has an input disable function on pin 7, and a selectable high or low failsafe-output function with the CTRL pin (pin 10). The failsafe output is a logic high when a logic high is placed on the CTRL pin or the pin is left unconnected. If a logic low signal is applied to the CTRL pin, the failsafe output becomes a logic-low output state. The input disable function of the ISO7240CF device prevents data from being passed across the isolation barrier to the output. When the inputs are disabled or VCC1 is powered down, the outputs are set by the CTRL pin.
These devices can be powered from 3.3V or 5V supplies on either side, in any combination. The signal input pins are 5V tolerant regardless of the voltage supply level that is used.
These devices are characterized for operation over the ambient temperature range of –40°C to +125°C.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | ISO724x High-Speed, Quad-Channel Digital Isolators datasheet (Rev. U) | PDF | HTML | 22 Okt 2024 |
| Application note | Digital Isolator Design Guide (Rev. G) | PDF | HTML | 13 Sep 2023 | |
| White paper | Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. C) | PDF | HTML | 07 Sep 2023 | |
| Certificate | CSA Certificate for ISO72xxDW | 22 Feb 2023 | ||
| Certificate | UL Certificate of Compliance File E181974 Vol 4 Sec 1 (Rev. A) | 05 Aug 2022 | ||
| White paper | Why are Digital Isolators Certified to Meet Electrical Equipment Standards? | 16 Nov 2021 | ||
| White paper | Distance Through Insulation: How Digital Isolators Meet Certification Requiremen | PDF | HTML | 11 Jun 2021 | |
| EVM User's guide | Universal Digital Isolator Evaluation Module | PDF | HTML | 04 Mär 2021 | |
| Application brief | Considerations for Selecting Digital Isolators | 24 Jul 2018 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
DIGI-ISO-EVM ist ein Evaluierungsmodul (EVM), mit dem Sie alle ein-, zwei-, drei-, vier- oder sechskanaligen digitalen Isolatoren von TI in fünf verschiedenen Gehäusen evaluieren können: 8-poliges SOIC mit schmalem Gehäuse (D), 8-poliges SOIC mit breitem Gehäuse (DWV), 16-poliges SOIC mit breitem (...)
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| SOIC (DW) | 16 | Ultra Librarian |
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.