Startseite Energiemanagement Linear- und Low-Dropout-Regler (LDO)

LM1084

AKTIV

Linearer Spannungsregler, 5,5 A, 29 V

Produktdetails

Output options Adjustable Output, Fixed Output Iout (max) (A) 5.5 Vin (max) (V) 29 Vin (min) (V) 2.6 Vout (max) (V) 27.5 Vout (min) (V) 1.25 Fixed output options (V) 3.3, 5 Noise (µVrms) 38 Iq (typ) (mA) 5 Thermal resistance θJA (°C/W) 23 Rating Catalog Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Accuracy (%) 1.5 PSRR at 100 KHz (dB) 30 Dropout voltage (Vdo) (typ) (mV) 1300 Operating temperature range (°C) -40 to 125
Output options Adjustable Output, Fixed Output Iout (max) (A) 5.5 Vin (max) (V) 29 Vin (min) (V) 2.6 Vout (max) (V) 27.5 Vout (min) (V) 1.25 Fixed output options (V) 3.3, 5 Noise (µVrms) 38 Iq (typ) (mA) 5 Thermal resistance θJA (°C/W) 23 Rating Catalog Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Accuracy (%) 1.5 PSRR at 100 KHz (dB) 30 Dropout voltage (Vdo) (typ) (mV) 1300 Operating temperature range (°C) -40 to 125
TO-220 (NDE) 3 46.5328 mm² 10.16 x 4.58 TO-263 (KTT) 3 154.8384 mm² 10.16 x 15.24
  • Available in 3.3V, 5.0V, and adjustable versions
  • Current limiting and thermal protection
  • Output current: 5A
  • Industrial temperature range: −40°C to 125°C
  • Line regulation: 0.015% (typical)
  • Load regulation: 0.1% (typical)
  • Available in 3.3V, 5.0V, and adjustable versions
  • Current limiting and thermal protection
  • Output current: 5A
  • Industrial temperature range: −40°C to 125°C
  • Line regulation: 0.015% (typical)
  • Load regulation: 0.1% (typical)

The LM1084 is a regulator with a maximum dropout of 1.5V at 5A of load current. The device has the same pinout as TI’s industry standard LM317.

Two resistors are required to set the output voltage of the adjustable output voltage version of the LM1084. Fixed output voltage versions integrate the adjust resistors.

The LM1084 circuit includes a zener trimmed band-gap reference, current limiting, and thermal shutdown.

Refer to LM1085 for the 3A version, and the LM1086 for the 1.5A version.

The LM1084 is a regulator with a maximum dropout of 1.5V at 5A of load current. The device has the same pinout as TI’s industry standard LM317.

Two resistors are required to set the output voltage of the adjustable output voltage version of the LM1084. Fixed output voltage versions integrate the adjust resistors.

The LM1084 circuit includes a zener trimmed band-gap reference, current limiting, and thermal shutdown.

Refer to LM1085 for the 3A version, and the LM1086 for the 1.5A version.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 11
Typ Titel Datum
* Data sheet LM1084 5A Low Dropout Positive Regulators datasheet (Rev. H) PDF | HTML 22 Mär 2024
Application note A Topical Index of TI LDO Application Notes (Rev. F) 27 Jun 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 21 Mär 2018
Technical article Selecting ESR for linear regulator stability PDF | HTML 14 Mär 2016
Application note AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A) 06 Mai 2013
Application note AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) 06 Mai 2013
Application note Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) 05 Mai 2013
Application note Packaging Limits Range of Linear Regulators 08 Mai 2010
Application note Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A) 04 Jun 2008
Application note Understanding the Terms and Definitions of LDO Voltage Regulators 21 Okt 1999

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

LM1084 3.3V Unencrypted PSpice Transient Model

SNVM997.ZIP (1 KB) - PSpice Model
Simulationsmodell

LM1084_3P3 PSpice Transient Model

SNVM617.ZIP (31 KB) - PSpice Model
Simulationsmodell

LM1084_5P0 PSpice Transient Model

SNVM621.ZIP (31 KB) - PSpice Model
Simulationsmodell

LM1084_5P0 Unencrypted PSpice Transient Model

SNVM996.ZIP (1 KB) - PSpice Model
Simulationsmodell

LM1084_ADJ PSpice Transient Model

SNVM616.ZIP (33 KB) - PSpice Model
Simulationsmodell

LM1084_ADJ Unencrypted PSpice Transient Model

SNVM998.ZIP (1 KB) - PSpice Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TO-220 (NDE) 3 Ultra Librarian
TO-263 (KTT) 3 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos