LM2596

AKTIV

SIMPLE SWITCHE®-Abwärtsregler (4,5V bis 40 V, 3 A) mit niedriger Komponentenanzahl

Jetzt bestellen

Datenblatt

document-pdfAcrobat LM2596 SIMPLE SWITCHER® Power Converter 150-kHz 3-A Step-Down Voltage Regulator datasheet (Rev. G) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung

LMR51430

AKTIV

SIMPLE SWITCHER®; 4,5 V bis 36 V, synchroner 3-A-Abwärtswandler mit 40-μA-IQ Next-generation with lower IQ.

TLVM13630

AKTIV

Kompaktes 3-A-Abwärtswandler-Leistungsmodul für 3 V bis 36 V Eingangsspannung und 1 V bis 6 V Ausgan Save board space, simplify design and speed time to market with an integrated-inductor power module.

TPSM63603

AKTIV

Kompaktes 3-A-Leistungsmodul für 3 bis 36 V Eingangsspannung und 1 bis 16 V Ausgangsspannung Next-generation with spread spectrum and frequency synchronization.

LM2596

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

4.5

Vin (max) (V)

40

Switching frequency (min) (kHz)

110

Switching frequency (max) (kHz)

173

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

37

Iq (typ) (µA)

5000

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

4.5

Vin (max) (V)

40

Switching frequency (min) (kHz)

110

Switching frequency (max) (kHz)

173

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

37

Iq (typ) (µA)

5000

Duty cycle (max) (%)

100

TO-220 (NDH)

5

86.0552 mm² 10.16 x 8.47

TO-220 (NEB)

5

46.4312 mm² 10.16 x 4.57

TO-263 (KTT)

5

154.8384 mm² 10.16 x 15.24

New product available:
- LMR51430 4.5 to 36-V, 3-A, 500-kHz and 1.1-MHz synchronous converter
For faster time to market:
- TLVM13630 3 to 36-V, 3-A, 200-kHz to 2.2-MHz power module
3.3-V, 5-V, 12-V, and adjustable output versions
Adjustable version output voltage range: 1.2-V to 37-V ±4% maximum over line and load conditions
Available in TO-220 and TO-263 packages
3-A output load current
Input voltage range up to 40 V
Requires only four external components
Excellent line and load regulation specifications
150-kHz fixed-frequency internal oscillator
TTL shutdown capability
Low power standby mode, I Q, typically 80 µA
High efficiency
Uses readily available standard inductors
Thermal shutdown and current-limit protection
Create a custom design using the LM2596 with the WEBENCH Power Designer

New product available:
- LMR51430 4.5 to 36-V, 3-A, 500-kHz and 1.1-MHz synchronous converter
For faster time to market:
- TLVM13630 3 to 36-V, 3-A, 200-kHz to 2.2-MHz power module
3.3-V, 5-V, 12-V, and adjustable output versions
Adjustable version output voltage range: 1.2-V to 37-V ±4% maximum over line and load conditions
Available in TO-220 and TO-263 packages
3-A output load current
Input voltage range up to 40 V
Requires only four external components
Excellent line and load regulation specifications
150-kHz fixed-frequency internal oscillator
TTL shutdown capability
Low power standby mode, I Q, typically 80 µA
High efficiency
Uses readily available standard inductors
Thermal shutdown and current-limit protection
Create a custom design using the LM2596 with the WEBENCH Power Designer

The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation, and a fixed-frequency oscillator.

The LM2596 series operates at a switching frequency of 150 kHz, thus allowing smaller sized filter components than what can be required with lower frequency switching regulators. Available in a standard 5-pin TO-220 package with several different lead bend options, and a 5-pin TO-263 surface mount package.

A standard series of inductors are available from several different manufacturers optimized for use with the LM2596 series. This feature greatly simplifies the design of switch-mode power supplies.

Other features include a ±4% tolerance on output voltage under specified input voltage and output load conditions, and ±15% on the oscillator frequency. External shutdown is included, featuring typically 80 µA standby current. Self-protection features include a two stage frequency reducing current limit for the output switch and an overtemperature shutdown for complete protection under fault conditions.

The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation, and a fixed-frequency oscillator.

The LM2596 series operates at a switching frequency of 150 kHz, thus allowing smaller sized filter components than what can be required with lower frequency switching regulators. Available in a standard 5-pin TO-220 package with several different lead bend options, and a 5-pin TO-263 surface mount package.

A standard series of inductors are available from several different manufacturers optimized for use with the LM2596 series. This feature greatly simplifies the design of switch-mode power supplies.

Other features include a ±4% tolerance on output voltage under specified input voltage and output load conditions, and ±15% on the oscillator frequency. External shutdown is included, featuring typically 80 µA standby current. Self-protection features include a two stage frequency reducing current limit for the output switch and an overtemperature shutdown for complete protection under fault conditions.

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 22

	Typ	Titel		Datum
*	Data sheet	LM2596 SIMPLE SWITCHER® Power Converter 150-kHz 3-A Step-Down Voltage Regulator datasheet (Rev. G)	PDF \| HTML	22 Mär 2023
	Application note	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	25 Mär 2024
	Technical article	How to increase system reliability and simplify design using DC/DC converters	PDF \| HTML	13 Jun 2016
	Technical article	The importance of accurate switching frequency and current limit when selecting bu	PDF \| HTML	19 Apr 2016
	Technical article	Advantages of leaded packages in robust industrial designs	PDF \| HTML	08 Mär 2016
	Application note	Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)		12 Sep 2014
	Application note	AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)		24 Apr 2013
	Application note	AN-1081 Low-Cost Low-Parts-Count DC/DC Converter With Multiple Outputs (Rev. B)		23 Apr 2013
	Application note	AN-1082 Adjust or Synchronize LM2586/88 Switching Frequency (Rev. B)		23 Apr 2013
	Application note	AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)		23 Apr 2013
	Application note	AN-1197 Selecting Inductors for Buck Converters (Rev. B)		23 Apr 2013
	Application note	AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)		23 Apr 2013
	Application note	AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)		23 Apr 2013
	Application note	AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)		23 Apr 2013
	Application note	AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)		23 Apr 2013
	Application note	AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)		23 Apr 2013
	Application note	AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)		23 Apr 2013
	Application note	Buck Converters Provide a Battery Charger and System Power		21 Mär 2007
	Application note	Simple Techniques Minimize Cross-Coupling in Distributed Power Systems		21 Mär 2007
	Application note	Input and Output Capacitor Selection		19 Sep 2005
	More literature	SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations		12 Jul 2005
	Application note	AN-643 EMI/RFI Board Design (Rev. B)		03 Mai 2004

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM2596S-ADJEVM — Evaluierungsmodul für Abwärtswandler LM2596

The LM2596S-ADJEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM2596 step-down converter. The EVM operates from an 7V to 40V input and provides a 5V output at 3A.

Benutzerhandbuch: PDF