Startseite Verstärker Operationsverstärker (OpAmps) Präzisionsoperationsverstärker (Vos < 1 mV)
Startseite
Verstärker
Operationsverstärker (OpAmps)
Präzisionsoperationsverstärker (Vos < 1 mV)

OPA4277-SP

AKTIV

Hoch-Präzisions-Operationsverstärker

Jetzt bestellen
Datenblatt

OPA4277-SP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Vos (offset voltage at 25°C) (max) (mV) 0.065 Offset drift (typ) (µV/°C) 0.15 Input bias current (max) (pA) 17500 GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.8 Rail-to-rail No Iq per channel (typ) (mA) 0.79 Vn at 1 kHz (typ) (nV√Hz) 8 CMRR (typ) (dB) 140 Rating Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.035 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 0.5 Output swing headroom (to positive supply) (typ) (V) -1.2 THD + N at 1 kHz (typ) (%) 0.002
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Vos (offset voltage at 25°C) (max) (mV) 0.065 Offset drift (typ) (µV/°C) 0.15 Input bias current (max) (pA) 17500 GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.8 Rail-to-rail No Iq per channel (typ) (mA) 0.79 Vn at 1 kHz (typ) (nV√Hz) 8 CMRR (typ) (dB) 140 Rating Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.035 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 0.5 Output swing headroom (to positive supply) (typ) (V) -1.2 THD + N at 1 kHz (typ) (%) 0.002
CDIP_SB (JDJ) 28 266.3444 mm² 35.56 x 7.49 CFP (HFR) 14 97.75 mm² 11.5 x 8.5 DIESALE (KGD) — See data sheet
  • QMLV Qualified: 5962-16209
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 krad(Si)
    • ELDRS-Free (See Radiation Report)
    • Single Event Latchup (SEL) Immune to LET = 85 MeV-cm2/mg
  • Ultra-Low Offset Voltage: 20 µV
  • Ultra-Low Drift: ±0.15 µV/°C
  • High Open-Loop Gain: 134 dB
  • High Common-Mode Rejection: 140 dB
  • High-Power Supply Rejection: 130 dB
  • Wide Supply Range: ±2 to ±18 V
  • Low-Quiescent Current: 800 µA/Amplifier
  • Available in 14-lead CFP With Industry Standard Quad Operational Amplifier Pinout
  • QMLV Qualified: 5962-16209
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 krad(Si)
    • ELDRS-Free (See Radiation Report)
    • Single Event Latchup (SEL) Immune to LET = 85 MeV-cm2/mg
  • Ultra-Low Offset Voltage: 20 µV
  • Ultra-Low Drift: ±0.15 µV/°C
  • High Open-Loop Gain: 134 dB
  • High Common-Mode Rejection: 140 dB
  • High-Power Supply Rejection: 130 dB
  • Wide Supply Range: ±2 to ±18 V
  • Low-Quiescent Current: 800 µA/Amplifier
  • Available in 14-lead CFP With Industry Standard Quad Operational Amplifier Pinout

The OPA4277-SP precision operational amplifier replaces the industry standard LM124-SP. It offers improved noise and two orders of magnitude lower input offset voltage. Features include ultra-low offset voltage and drift, low-bias current, high common-mode rejection, and high-power supply rejection.

The OPA4277-SP operates from ±2- to ±18-V supplies with excellent performance. Unlike most operational amplifiers which are specified at only one supply voltage, the OPA4277-SP precision operational amplifier is specified for real-world applications; a single limit applies over the ±5- to ±15-V supply range. High performance is maintained as the amplifier swings to the specified limits.

The OPA4277-SP is easy to use and free from phase inversion and overload problems found in some operational amplifiers. It is stable in unity gain and provides excellent dynamic behavior over a wide range of load conditions. The OPA4277-SP features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded.

The OPA4277-SP precision operational amplifier replaces the industry standard LM124-SP. It offers improved noise and two orders of magnitude lower input offset voltage. Features include ultra-low offset voltage and drift, low-bias current, high common-mode rejection, and high-power supply rejection.

The OPA4277-SP operates from ±2- to ±18-V supplies with excellent performance. Unlike most operational amplifiers which are specified at only one supply voltage, the OPA4277-SP precision operational amplifier is specified for real-world applications; a single limit applies over the ±5- to ±15-V supply range. High performance is maintained as the amplifier swings to the specified limits.

The OPA4277-SP is easy to use and free from phase inversion and overload problems found in some operational amplifiers. It is stable in unity gain and provides excellent dynamic behavior over a wide range of load conditions. The OPA4277-SP features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded.
filter Andere Präzisionsoperationsverstärker (Vos < 1 mV) suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet OPA4277-SP Radiation Hardened High-Precision Operational Amplifier datasheet (Rev. A) PDF | HTML 09 Jan 2019
* Radiation & reliability report Single-Event Effects Test Report for OPA4277-SP High-Precision Operational Ampli 10 Apr 2018
* Radiation & reliability report OPA4277-SP Total Ionizing Dose (TID) Radiation Report 05 Mär 2018

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​