These data selectors/multiplexers contain full binary decoding to select one-of-eight data sources and feature controlled complementary 3-state outputs.
The 3-state outputs can interface with and drive data lines of
bus-organized systems. With all but one of the common outputs
disabled (at the high-impedance state), the low impedance of the
signal-enabled output drives the bus line to a high or low logic
level. Both outputs are controlled by the output-enable (OE\) input.
The outputs are disabled when 
is high.
The SN54ALS251 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS251 is characterized for operation from 0°C to 70°C.
D0, D1,...D7 = the level of the respective D input
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | 1-of-8 Data Selectors/Multiplexers With 3-State Outputs datasheet (Rev. A) | 01 Dez 1994 |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.