SN75175

AKTIV

Vierfach-Differenzleitungsempfänger

Jetzt bestellen

Datenblatt

document-pdfAcrobat SNx5175 Quadruple Differential Line Receivers datasheet (Rev. D) (Englisch) PDF | HTML

SN75175

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of receivers

4

Number of transmitters

0

Duplex

Half

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Catalog

Operating temperature range (°C)

0 to 70

Number of receivers

4

Number of transmitters

0

Duplex

Half

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Catalog

Operating temperature range (°C)

0 to 70

PDIP (N)

16

181.42 mm² 19.3 x 9.4

SOIC (D)

16

59.4 mm² 9.9 x 6

SOP (NS)

16

79.56 mm² 10.2 x 7.8

Meet or exceed the requirements of ANSI standard EIA/TIA-422-B, RS-423-B, and RS-485
Meet ITU recommendations V.10, V.11, X.26, and X.27
Designed for multipoint bus transmission on long bus lines in noisy environments
3-state outputs
Common-mode input voltage range: −12 V to 12 V
Input sensitivity: ±200 mV
Input hysteresis: 50-mV typical
High input impedance: 12-kΩ minimum
Operate from single 5-V supply
Low-power requirements
Plug-in replacement for MC3486

Meet or exceed the requirements of ANSI standard EIA/TIA-422-B, RS-423-B, and RS-485
Meet ITU recommendations V.10, V.11, X.26, and X.27
Designed for multipoint bus transmission on long bus lines in noisy environments
3-state outputs
Common-mode input voltage range: −12 V to 12 V
Input sensitivity: ±200 mV
Input hysteresis: 50-mV typical
High input impedance: 12-kΩ minimum
Operate from single 5-V supply
Low-power requirements
Plug-in replacement for MC3486

The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. Each of the two pairs of receivers has a common active-high enable.

The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

The SN65175 is characterized for operation from −40°C to 85°C. The SN75175 is characterized for operation from 0°C to 70°C.

The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. Each of the two pairs of receivers has a common active-high enable.

The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

The SN65175 is characterized for operation from −40°C to 85°C. The SN75175 is characterized for operation from 0°C to 70°C.

filter

Andere RS-485- & RS-422-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	SNx5175 Quadruple Differential Line Receivers datasheet (Rev. D)	PDF \| HTML	16 Okt 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

SN75175 IBIS Model

SCEM495.ZIP (13 KB) - IBIS Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
PDIP (N)	16	Ultra Librarian
SOIC (D)	16	Ultra Librarian
SOP (NS)	16	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

SN75175

Vierfach-Differenzleitungsempfänger

SN75175

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung

Technische Dokumentation

Design und Entwicklung

SN75175 IBIS Model

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos