NEU

THVD2450V-EP

Name: THVD2450V-EP
Brand: TI
SKU: THVD2450V-EP
Price: 10.95 USD

AKTIV

Verbessertes Produkt, Halbduplex-RS-485-Transceiver mit 3 bis 5,5 V, 50 Mbit/s, flexiblem E/A und 70

Jetzt bestellen

Datenblatt

document-pdfAcrobat THVD24xxV-EP Enhanced 3V to 5.5V RS-485 Transceivers With 1.8V VIO Capability datasheet (Englisch) PDF | HTML

THVD2450V-EP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of receivers

1

Number of transmitters

1

Duplex

Half

Supply voltage (nom) (V)

3.3, 5

Signaling rate (max) (MBits)

50

IEC 61000-4-2 contact (±V)

15000

Fault protection (V)

-70 to 70

Common-mode range (V)

-12 to 12

Number of nodes

256

Features

1.65-V I/O supply, Fault protection, IEC ESD protection, PROFIBUS

Isolated

No

Supply current (max) (µA)

5600

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

Number of receivers

1

Number of transmitters

1

Duplex

Half

Supply voltage (nom) (V)

3.3, 5

Signaling rate (max) (MBits)

50

IEC 61000-4-2 contact (±V)

15000

Fault protection (V)

-70 to 70

Common-mode range (V)

-12 to 12

Number of nodes

256

Features

1.65-V I/O supply, Fault protection, IEC ESD protection, PROFIBUS

Isolated

No

Supply current (max) (µA)

5600

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

VSON (DRC)

10

9 mm² 3 x 3

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
Enhanced Product
- Military temperature range (-55°C to 125°C)
- One wafer fabrication site and one assembly and test site
- Gold bond wire, NiPdAu lead finish
- Wafer lot traceability
- Extended product life cycle
3V to 5.5V supply voltage
Differential output exceeds 2.1V for PROFIBUS compatibility with 5V supply
1.65V to 5.5V Supply for data and enable signals
SLR Pin Selectable Data Rates:
- THVD2410V-EP : 250kbps and 1Mbps
- THVD2450V-EP, THVD2452V-EP: 20Mbps and 50Mbps
Bus I/O protection
- ±70V DC bus fault
- ±16kV HBM ESD
- ±12kV IEC 61000-4-2 contact discharge
- ±12kV IEC 61000-4-2 air-gap discharge
- ±4kV IEC 61000-4-4 fast transient burst
Half-duplex and full-duplex devices available in two speed grades
Symmetric common mode voltage range: ±12V
Enhanced receiver hysteresis for noise immunity
Low power consumption
- Low shutdown supply current: < 1µA
- Current during operation: < 5.6mA
Glitch-free power-up/down for hot plug-in capability
Open, short, and idle bus failsafe
Thermal shutdown
1/8 unit load (up to 256 bus nodes)
Small mm x 3mm VSON package (half-duplex) to save board space, or 14-D (full-duplex) for drop-in compatibility

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
Enhanced Product
- Military temperature range (-55°C to 125°C)
- One wafer fabrication site and one assembly and test site
- Gold bond wire, NiPdAu lead finish
- Wafer lot traceability
- Extended product life cycle
3V to 5.5V supply voltage
Differential output exceeds 2.1V for PROFIBUS compatibility with 5V supply
1.65V to 5.5V Supply for data and enable signals
SLR Pin Selectable Data Rates:
- THVD2410V-EP : 250kbps and 1Mbps
- THVD2450V-EP, THVD2452V-EP: 20Mbps and 50Mbps
Bus I/O protection
- ±70V DC bus fault
- ±16kV HBM ESD
- ±12kV IEC 61000-4-2 contact discharge
- ±12kV IEC 61000-4-2 air-gap discharge
- ±4kV IEC 61000-4-4 fast transient burst
Half-duplex and full-duplex devices available in two speed grades
Symmetric common mode voltage range: ±12V
Enhanced receiver hysteresis for noise immunity
Low power consumption
- Low shutdown supply current: < 1µA
- Current during operation: < 5.6mA
Glitch-free power-up/down for hot plug-in capability
Open, short, and idle bus failsafe
Thermal shutdown
1/8 unit load (up to 256 bus nodes)
Small mm x 3mm VSON package (half-duplex) to save board space, or 14-D (full-duplex) for drop-in compatibility

THVD24xxV-EP are ±70V fault-protected, half and full-duplex RS-422/RS-485 transceivers using a 1.65V to 5.5V logic supply for data and enable logic signals, and a 3V to 5.5V bus side supply. These devices have slew rate select feature that enables them to be used at two maximum speeds based on the SLR pin setting

These devices feature integrated IEC ESD protection, eliminating the need for external system-level protection components. The ±12V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250-mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.

THVD24xxV-EP half-duplex devices are available in small VSON package for space-constrained applications. The devices are available in standard 14-SOIC package.

THVD24xxV-EP are ±70V fault-protected, half and full-duplex RS-422/RS-485 transceivers using a 1.65V to 5.5V logic supply for data and enable logic signals, and a 3V to 5.5V bus side supply. These devices have slew rate select feature that enables them to be used at two maximum speeds based on the SLR pin setting

These devices feature integrated IEC ESD protection, eliminating the need for external system-level protection components. The ±12V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250-mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.

THVD24xxV-EP half-duplex devices are available in small VSON package for space-constrained applications. The devices are available in standard 14-SOIC package.

filter

Andere RS-485- & RS-422-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

	Typ	Titel		Datum
*	Data sheet	THVD24xxV-EP Enhanced 3V to 5.5V RS-485 Transceivers With 1.8V VIO Capability datasheet	PDF \| HTML	21 Mai 2024
*	Radiation & reliability report	THVD2450V-EP Enhanced Product Qualification and Reliability Report	PDF \| HTML	18 Jan 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

SN65HVD01-EVM — SN65HVD01-Evaluierungsmodul

Das Evaluierungsmodul (EVM) SN65HVD01-EVM unterstützt Sie bei der Evaluierung der Geräteleistung und unterstützt die schnelle Entwicklung und Analyse von Datenübertragungssystemen mit dem SN65HVD01DRC- und Low-Power-Transceiver mit 250 Kbit/s oder 20 Mbit/s. Daten-, Aktivierungs- und Bussignale (...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
VSON (DRC)	10	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

THVD2450V-EP

Verbessertes Produkt, Halbduplex-RS-485-Transceiver mit 3 bis 5,5 V, 50 Mbit/s, flexiblem E/A und 70

THVD2450V-EP

Produktdetails

Technische Dokumentation

Design und Entwicklung

SN65HVD01-EVM — SN65HVD01-Evaluierungsmodul

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos