NEU

THVD9491-SEP

Name: THVD9491-SEP
Brand: TI
SKU: THVD9491-SEP
Price: 200 USD

VORSCHAU

Strahlungstoleranter 3 V bis 5,5 V RS-485 Transceiver mit flexibler I/O-Versorgung und IEC ESD

Jetzt bestellen

Datenblatt

document-pdfAcrobat THVD9491-SEP Radiation Tolerant 3V to 5.5V RS-485 Transceiver with Flexible I/O Supply and IEC ESD Protection datasheet (Englisch) PDF | HTML

THVD9491-SEP

VORSCHAU

Datenblatt

Jetzt bestellen

Produktdetails

Number of receivers

1

Number of transmitters

1

Duplex

Full

Supply voltage (nom) (V)

3.3, 5

Signaling rate (max) (Mbps)

50

IEC 61000-4-2 contact (±V)

8000

Fault protection (V)

-70 to 70

Common-mode range (V)

-12 to 12

Number of nodes

256

Features

1.65-V I/O supply, Fault protection, IEC ESD protection, PROFIBUS

Isolated

No

Supply current (max) (µA)

72000

Rating

Space

Operating temperature range (°C)

-40 to 125

Number of receivers

1

Number of transmitters

1

Duplex

Full

Supply voltage (nom) (V)

3.3, 5

Signaling rate (max) (Mbps)

50

IEC 61000-4-2 contact (±V)

8000

Fault protection (V)

-70 to 70

Common-mode range (V)

-12 to 12

Number of nodes

256

Features

1.65-V I/O supply, Fault protection, IEC ESD protection, PROFIBUS

Isolated

No

Supply current (max) (µA)

72000

Rating

Space

Operating temperature range (°C)

-40 to 125

SOIC (D)

14

51.9 mm² 8.65 x 6

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
Total ionizing dose (TID) characterized up to 30krad (Si)
- Total ionizing dose radiation lot acceptance testing (TID RLAT) for every wafer lot to 30krad (Si)
Single-event effects (SEE) characterized
- Single event latch-up (SEL) immune to linear energy transfer (LET) = 43MeV⋅cm2 /mg at 125°C
Space enhanced plastic (Space EP)
- Controlled baseline
- One assembly and test site
- One fabrication site
- Gold bond wire
- NiPdAu lead finish
- Military temp range (-55°C to 125°C)
- Extended product life cycle
- Product traceability
- Meets the NASA ASTM E595 outgassing specification
3V to 5.5V supply voltage
1.65V to 5.5V Supply for data and enable signals
SLR Pin Selectable Data Rates:
- 20Mbps and 50Mbps
Bus I/O protection
- ±70V DC bus fault
- ±16kV HBM ESD
- ±8kV IEC 61000-4-2 contact discharge
- ±4kV IEC 61000-4-4 fast transient burst
Symmetric common mode range: ±12V
Enhanced receiver hysteresis for noise immunity
Glitch-free power-up or down for hot plug-in capability
Open, short, and idle bus failsafe
1/8 unit load (up to 256 bus nodes)
Leaded 14-pin SOIC package

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
Total ionizing dose (TID) characterized up to 30krad (Si)
- Total ionizing dose radiation lot acceptance testing (TID RLAT) for every wafer lot to 30krad (Si)
Single-event effects (SEE) characterized
- Single event latch-up (SEL) immune to linear energy transfer (LET) = 43MeV⋅cm2 /mg at 125°C
Space enhanced plastic (Space EP)
- Controlled baseline
- One assembly and test site
- One fabrication site
- Gold bond wire
- NiPdAu lead finish
- Military temp range (-55°C to 125°C)
- Extended product life cycle
- Product traceability
- Meets the NASA ASTM E595 outgassing specification
3V to 5.5V supply voltage
1.65V to 5.5V Supply for data and enable signals
SLR Pin Selectable Data Rates:
- 20Mbps and 50Mbps
Bus I/O protection
- ±70V DC bus fault
- ±16kV HBM ESD
- ±8kV IEC 61000-4-2 contact discharge
- ±4kV IEC 61000-4-4 fast transient burst
Symmetric common mode range: ±12V
Enhanced receiver hysteresis for noise immunity
Glitch-free power-up or down for hot plug-in capability
Open, short, and idle bus failsafe
1/8 unit load (up to 256 bus nodes)
Leaded 14-pin SOIC package

THVD9491-SEP is a space enhanced, ±70V fault-protected full-duplex RS-422/RS-485 transceiver using a 1.65V to 5.5V logic supply for data and enable logic signals, and a 3V to 5.5V bus side supply. The device has a slew rate select feature that enables the use at two maximum speeds based on the SLR pin setting.

The device features integrated IEC ESD protection, eliminating the need for external system-level protection components. The ±12V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.

THVD9491-SEP device is available in a standard 14-pin SOIC package.

THVD9491-SEP is a space enhanced, ±70V fault-protected full-duplex RS-422/RS-485 transceiver using a 1.65V to 5.5V logic supply for data and enable logic signals, and a 3V to 5.5V bus side supply. The device has a slew rate select feature that enables the use at two maximum speeds based on the SLR pin setting.

The device features integrated IEC ESD protection, eliminating the need for external system-level protection components. The ±12V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.

THVD9491-SEP device is available in a standard 14-pin SOIC package.

filter

Andere RS-485- & RS-422-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	THVD9491-SEP Radiation Tolerant 3V to 5.5V RS-485 Transceiver with Flexible I/O Supply and IEC ESD Protection datasheet	PDF \| HTML	09 Jan 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

THVD24X2VEVM — Evaluierungsmodul der THVD24X2V-Teilefamilie (EVM)

Der THVD24X2VEVM bietet eine schnelle Möglichkeit zur Evaluierung der THVD24X2V-Bauteilfamilie von TI. Es handelt sich um einen Vollduplex-RS-485-Transceiver mit auswählbarer Datenrate in einem 14-SOIC (D)-Gehäuse.

Benutzerhandbuch: PDF | HTML

Nicht verfügbar auf TI.com

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
SOIC (D)	14	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

THVD9491-SEP

Strahlungstoleranter 3 V bis 5,5 V RS-485 Transceiver mit flexibler I/O-Versorgung und IEC ESD

THVD9491-SEP

Produktdetails

Technische Dokumentation

Design und Entwicklung

THVD24X2VEVM — Evaluierungsmodul der THVD24X2V-Teilefamilie (EVM)

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos