Startseite Verstärker Komparatoren
Startseite
Verstärker
Komparatoren
NEU

TLV1H103-SEP

AKTIV

Strahlungstoleranter Einkanal-Komparator, 2,5 ns, mit Push-Pull-Ausgängen

Jetzt bestellen
Datenblatt

TLV1H103-SEP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 1 Output type Push-Pull Propagation delay time (µs) 0.0025 Vs (max) (V) 5.5 Vs (min) (V) 2.4 Rating Space Features Adjustable Hysteresis, Latch, POR Iq per channel (typ) (mA) 5.7 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 5000 VICR (max) (V) 5.7 VICR (min) (V) -0.2
Number of channels 1 Output type Push-Pull Propagation delay time (µs) 0.0025 Vs (max) (V) 5.5 Vs (min) (V) 2.4 Rating Space Features Adjustable Hysteresis, Latch, POR Iq per channel (typ) (mA) 5.7 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 5000 VICR (max) (V) 5.7 VICR (min) (V) -0.2
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8

  • VID V62/22606-01XE

  • Radiation - Total Ionizing Dose (TID)

    • TID Characterized to 30krad (Si)

    • ELDRS-Free to 30krad (Si)

    • RHA/RLAT to 30krad (Si)

  • Radiation - Single-Event Effects (SEE)

    • SEL Immune to LET = 43MeV·cm2/mg

    • SET Characterized to LET = 43MeV·cm2/mg

  • Space Enhanced Plastic

    • Controlled Baseline

    • One Assembly/Test Site

    • One Fabrication Site

    • Extended Product Life Cycle

    • Product Traceability

  • Low propagation delay: 2.5ns
  • Low overdrive dispersion: 700ps
  • High toggle frequency: 325MHz
  • Narrow pulse width detection capability: 1.5ns
  • Input common-mode range extends 200mV beyond both rails
  • Supply range: 2.4V to 5.5V
  • Adjustable hysteresis control
  • Output latch capability

  • VID V62/22606-01XE

  • Radiation - Total Ionizing Dose (TID)

    • TID Characterized to 30krad (Si)

    • ELDRS-Free to 30krad (Si)

    • RHA/RLAT to 30krad (Si)

  • Radiation - Single-Event Effects (SEE)

    • SEL Immune to LET = 43MeV·cm2/mg

    • SET Characterized to LET = 43MeV·cm2/mg

  • Space Enhanced Plastic

    • Controlled Baseline

    • One Assembly/Test Site

    • One Fabrication Site

    • Extended Product Life Cycle

    • Product Traceability

  • Low propagation delay: 2.5ns
  • Low overdrive dispersion: 700ps
  • High toggle frequency: 325MHz
  • Narrow pulse width detection capability: 1.5ns
  • Input common-mode range extends 200mV beyond both rails
  • Supply range: 2.4V to 5.5V
  • Adjustable hysteresis control
  • Output latch capability

The TLV1H103-SEP is a 325MHz, high speed comparator with rail-to-rail inputs and a propagation delay of 2.5ns. The combination of fast response and wide operating voltage range make the comparator an excellent choice for narrow signal pulse detection and data and clock recovery applications in radar imaging and communications payload systems.

The push-pull (single-ended) outputs of the TLV1H103-SEP simplify and save cost on board-to-board wiring for I/O interfaces while reducing power consumption when compared to alternative high-speed differential output comparators. In addition, the TLV1H103-SEP offers the features such as adjustable hysteresis control and output latch capability. The comparator can directly interface most prevailing digital controllers and IO expanders in the downstream.

The TLV1H103-SEP uses a high-speed complementary BiCMOS process and is available in a 6-pin, SOT-23 package.

The TLV1H103-SEP is a 325MHz, high speed comparator with rail-to-rail inputs and a propagation delay of 2.5ns. The combination of fast response and wide operating voltage range make the comparator an excellent choice for narrow signal pulse detection and data and clock recovery applications in radar imaging and communications payload systems.

The push-pull (single-ended) outputs of the TLV1H103-SEP simplify and save cost on board-to-board wiring for I/O interfaces while reducing power consumption when compared to alternative high-speed differential output comparators. In addition, the TLV1H103-SEP offers the features such as adjustable hysteresis control and output latch capability. The comparator can directly interface most prevailing digital controllers and IO expanders in the downstream.

The TLV1H103-SEP uses a high-speed complementary BiCMOS process and is available in a 6-pin, SOT-23 package.
filter Andere Komparatoren suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Typ Titel Datum
* Data sheet TLV1H103-SEP Radiation Tolerant High-Speed Comparator with 2.5ns Propagation Delay datasheet PDF | HTML 14 Aug 2024
* Radiation & reliability report TLV1H103-SEP Radiation Tolerant High-Speed Comparator TID Report (Rev. B) 14 Aug 2024
* Radiation & reliability report TLV1H103-SEP Production Flow and Reliability Report PDF | HTML 12 Aug 2024
* Radiation & reliability report TLV1H103-SEP Neutron Displacement Damage (NDD) Characterization Report 29 Apr 2024
* Radiation & reliability report TLV1H103-SEP Single-Event Effects (SEE) Radiation Report PDF | HTML 26 Apr 2024
Certificate HS-COMPARATOR-EVM EU Declaration of Conformity (DoC) 08 Apr 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

TLV1H103-SEP PSpice Model

SNOM799.ZIP (269 KB) - PSpice Model
Herunterladen
Simulationsmodell

TLV1H103-SEP TINA-TI Model

SNOM798.ZIP (0 KB) - TINA-TI Spice Model
Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-23 (DBV) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos