Startseite Energiemanagement Leistungsschalter High-Side-Schalter
Startseite
Energiemanagement
Leistungsschalter
High-Side-Schalter

TPS27S100

AKTIV

Industrieller 40-V-, 80-mΩ-, 4-A-, 1-Kanal-High-Side-Schalter mit einstellbarer Strombegrenzung

Jetzt bestellen
Datenblatt

TPS27S100

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 1 Operating voltage (max) (V) 40 Operating voltage (min) (V) 4 Ron (typ) (mΩ) 80 Imax (A) 4 Current limit (min) (A) 0.5 Current limit (max) (A) 7 Current limit type Adjustable Current limit accuracy +/-20% @ 0.5A Current sense accuracy +/-30mA @ 1A, 3mA @ 25mA FET Internal Features Current sense output, Programmable current limit, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Catalog
Number of channels 1 Operating voltage (max) (V) 40 Operating voltage (min) (V) 4 Ron (typ) (mΩ) 80 Imax (A) 4 Current limit (min) (A) 0.5 Current limit (max) (A) 7 Current limit type Adjustable Current limit accuracy +/-20% @ 0.5A Current sense accuracy +/-30mA @ 1A, 3mA @ 25mA FET Internal Features Current sense output, Programmable current limit, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Catalog
HTSSOP (PWP) 14 32 mm² 5 x 6.4 WQFN (RRK) 16 14 mm² 4 x 3.5
  • 80-mΩ Single-channel High-side switch with full diagnostics
    • TPS27S100A: Open-drain status output
    • TPS27S100B: Current monitor analog output
  • Wide operating voltage 3.5 V to 40 V
  • Very-low standby current, <0.5 µA
  • Operating junction temperature, –40 to 150°C
  • Input control, 3.3-V and 5-V logic compatible
  • High-accuracy current monitor, ±30 mA at 1 A
  • Adjustable current limit (0.5-A to 6-A) with external resistor, ±20% at 0.5 A
  • Diagnostic enable function for multiplexing of MCU, analog or digital interface
  • Excellent ESD protection on IN and OUT pins
    • ±16 kV IEC 61000-4-2 ESD contact discharge
    • ±4 kV IEC 61000-4-4 Electrical fast transient
    • ±1.0 kV/42 Ω IEC 61000-4-5 Surge
  • Protection
    • Overload and short-circuit-to-GND protection
    • Inductive load negative voltage clamp
    • Undervoltage lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND protection
  • Diagnostic
    • On- and Off-State output Open-Load / short to supply detection
    • Overload and short to ground detection
    • Thermal shutdown and swing detection
  • Thermally-Enhanced 14-Pin PWP or 16-Pin QFN package
  • 80-mΩ Single-channel High-side switch with full diagnostics
    • TPS27S100A: Open-drain status output
    • TPS27S100B: Current monitor analog output
  • Wide operating voltage 3.5 V to 40 V
  • Very-low standby current, <0.5 µA
  • Operating junction temperature, –40 to 150°C
  • Input control, 3.3-V and 5-V logic compatible
  • High-accuracy current monitor, ±30 mA at 1 A
  • Adjustable current limit (0.5-A to 6-A) with external resistor, ±20% at 0.5 A
  • Diagnostic enable function for multiplexing of MCU, analog or digital interface
  • Excellent ESD protection on IN and OUT pins
    • ±16 kV IEC 61000-4-2 ESD contact discharge
    • ±4 kV IEC 61000-4-4 Electrical fast transient
    • ±1.0 kV/42 Ω IEC 61000-4-5 Surge
  • Protection
    • Overload and short-circuit-to-GND protection
    • Inductive load negative voltage clamp
    • Undervoltage lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND protection
  • Diagnostic
    • On- and Off-State output Open-Load / short to supply detection
    • Overload and short to ground detection
    • Thermal shutdown and swing detection
  • Thermally-Enhanced 14-Pin PWP or 16-Pin QFN package

The TPS27S100x is a single-channel, fully-protected, high-side switch with an integrated NMOS and charge pump. Full diagnostics and high-accuracy current-monitor features enable intelligent control of the load. An adjustable current-limit function greatly improves the reliability of the whole system. The device diagnostic reporting has two versions to support both digital fault status and analog current monitor output. Accurate current monitor and adjustable current limit features differentiate it from the market.

The TPS27S100x is a single-channel, fully-protected, high-side switch with an integrated NMOS and charge pump. Full diagnostics and high-accuracy current-monitor features enable intelligent control of the load. An adjustable current-limit function greatly improves the reliability of the whole system. The device diagnostic reporting has two versions to support both digital fault status and analog current monitor output. Accurate current monitor and adjustable current limit features differentiate it from the market.
filter Andere High-Side-Schalter suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
TPS272C45 AKTIV Industrieller 36-V-, 45-mΩ-, 3-A-, 2-Kanal-High-Side-Schalter mit einstellbarer Strombegrenzung Dual-channel version with lower RDSon for better power dissipation
TPS274C65 AKTIV Industrieller vierkanaliger High-Side-Schalter mit 12 V bis 36 V, 65 mΩ, SPI-Schnittstelle und integ Four-channel version with lower RDSON (65-mΩ), SPI interface and an integrated ADC
TPS281C30 AKTIV Einkanaliger Highside-Schalter, mit Toleranz für 60 V, 30 mΩ, 6 A. 60-V tolerant high-side switch

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 16
Typ Titel Datum
* Data sheet TPS27S100x 40-V, 4-A, 80-mΩ Single-Channel High-Side Switch datasheet (Rev. B) PDF | HTML 08 Mai 2019
Application brief Faster Switching of Large Inductive Loads in Digital Output Modules PDF | HTML 15 Jul 2022
Technical article Bulk up your 24-VDC power distribution with industrial high-side switches PDF | HTML 04 Mai 2021
Application note How To Drive Resistive, Inductive, Capacitive, and Lighting Loads (Rev. E) PDF | HTML 09 Mär 2021
Application note Designing for Loss of Ground on Texas Instruments High-Side Switches (Rev. A) PDF | HTML 16 Jul 2020
Application note High Accuracy Current Sense of Smart High Side Switches 01 Nov 2019
Application brief Optimizing the Power Supply for Digital I/O modules With Smart High-Side Switche 26 Sep 2019
E-book 11 Ways to Protect Your Power Path 03 Jul 2019
Application note Minimizing System Down-time with Smart eFuses 12 Jun 2019
Application note AEC-Q100-012 Short-Circuit Reliability Test Results for Smart Power Switches (Rev. A) 06 Mai 2019
Application note Basics of Power Switches (Rev. A) PDF | HTML 26 Apr 2019
Application brief Improved Automotive Short Circuit Reliability With Adjustable Current Limiting (Rev. A) 11 Apr 2019
Application note Adjustable Current Limit of Smart Power Switches (Rev. B) 21 Jan 2019
Application note Reverse battery protection for high side switches 12 Nov 2018
Test report TPS27S100x IEC 61000-4-x Testing Using EVM Board (Rev. A) 26 Feb 2018
Technical article Precise Current Limiter for Smart E-Meter PDF | HTML 28 Apr 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS27S100AEVM — TPS27S100A 40 V, 80 mΩ-Einzelkanal-High-Side-Schalter – Evaluierungsmodul

The Texas Instruments TPS27S100A evaluation module contains a TPS27S100A integrated circuit (IC), supporting 1 channel high side driver applications. The purpose of this EVM is to facilitate evaluation of the TPS27S100A for resistive, capacitive, inductive load layout of the EVM.
Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Evaluierungsplatine

TPS27S100BEVM — TPS27S100B 40 V, 80-mΩ-Einzelkanal-Highside-Schalter – Evaluierungsmodul

The Texas Instruments TPS27S100B evaluation module contains a TPS27S100B integrated circuit (IC), supporting 1 channel high side driver applications. The purpose of this EVM is to facilitate evaluation of the TPS27S100B for resistive, capacitive, inductive load layout of the EVM.
Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationsmodell

TPS27S100A Unencrypted PSpice Transient Model Package (Rev. A)

SLVMC97A.ZIP (29 KB) - PSpice Model
Herunterladen
Simulationsmodell

TPS27S100B Unencrypted PSpice Transient Model Package (Rev. A)

SLVMC96A.ZIP (50 KB) - PSpice Model
Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Referenzdesigns

TIDA-01599 — Referenzdesign für redundante zweikanalige, sichere Drehmomentabschaltung (STO) für AC-Inverter und

Dieses Referenzdesign skizziert ein sicheres STO-Subsystem (Torque Off-Drehmomentabschaltung) für einen dreiphasigen Inverter mit isolierten IGBT-Gatetreibern mit CMOS-Eingang. Das STO-Subsystem benützt eine Zweikanal-Architektur (1oo2) mit einer Hardware-Fehlertoleranz von 1 (HFT=1). Ihre (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-010008 — Referenzdesign auf Basis von Flat-Clamp-TVS zum Schutz vor Transienten für Netzanwendungen

This reference design features multiple approaches for  protecting AC or DC analog input, DC analog output, AC or DC binary input, digital output with a high side or low side driver, LCD bias supply, USB interfaces (power and data) and onboard power supplies with 24, 12 or 5V input used in (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-01600 — Referenzdesign für intelligente Bremssteuerung und Diagnose in Servoantrieben und Robotik

This reference design implements safe brake control functionality in servo drives as per IEC EN 61800-5-2 by providing two channel output signals to control an external holding brake. The holding brake will be latched when the power supply is cut off and released when voltage is applied to the (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-01552 — 8-Kanal, 2 A, Highside-Treiber-Referenzdesign für Module mit Digital-Ausgang

This eight-channel, parallel, 2-A, high-side, digital output reference design for factory automation applications like PLCs shows the diagnostic features and the power density of new Texas Instruments high-side driver components (such as TPS27S100). Each output can individually measure the output (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 14 Ultra Librarian
WQFN (RRK) 16 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos