Home Energiemanagement DC/DC-Schaltregler DC/DC-Wandler
Home
Energiemanagement
DC/DC-Schaltregler
DC/DC-Wandler
NEU

TPS7H4104-SEP

AKTIV

Strahlungstoleranter, synchroner Abwärtswandler mit 3 V bis 7 V Eingangsspannung, 3 A pro Kanal

Jetzt bestellen
Datenblatt

TPS7H4104-SEP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Space Topology Buck Iout (max) (A) 3 Vin (max) (V) 7 Vin (min) (V) 3 Vout (max) (V) 6.65 Vout (min) (V) 0.5 Features 4 outputs, Current Sharing, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Sequencing and monitoring, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.01 Duty cycle (max) (%) 100
Rating Space Topology Buck Iout (max) (A) 3 Vin (max) (V) 7 Vin (min) (V) 3 Vout (max) (V) 6.65 Vout (min) (V) 0.5 Features 4 outputs, Current Sharing, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Sequencing and monitoring, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.01 Duty cycle (max) (%) 100
HTQFP (PAP) 64 144 mm² 12 x 12
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability up to 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg*
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg*
  • Input voltage range from 3V to 7V
  • Up to 3A of maximum output current per channel or more when channels are paralleled
  • Typical efficiency of 91.1% (typ.) at VIN = 5V, VOUT = 1.8V, IOUT = 1A at fSW = 500kHz
  • Integrated 62mΩ (HS) and 55mΩ (LS) MOSFETs (typ. at VIN = 5V)
  • Flexible switching frequency:
    • 100kHz to 1MHz, internal oscillator
    • External synchronization capability
  • Accurate voltage reference of 599.48mV ± 1% over line, temperature, and TID
  • Monotonic start-up into pre-biased outputs
  • Per channel (CHx)
    • Adjustable slope compensation (RSCx)
    • Adjustable soft-start (SS_TRx)
    • Power-good output monitor for undervoltage and overvoltage (PWRGDx)
    • Input enable (ENx)
  • Sequence up and reverse sequence down when using EN_SEQ (only valid for TPS7H4104)
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temp range
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability up to 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg*
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg*
  • Input voltage range from 3V to 7V
  • Up to 3A of maximum output current per channel or more when channels are paralleled
  • Typical efficiency of 91.1% (typ.) at VIN = 5V, VOUT = 1.8V, IOUT = 1A at fSW = 500kHz
  • Integrated 62mΩ (HS) and 55mΩ (LS) MOSFETs (typ. at VIN = 5V)
  • Flexible switching frequency:
    • 100kHz to 1MHz, internal oscillator
    • External synchronization capability
  • Accurate voltage reference of 599.48mV ± 1% over line, temperature, and TID
  • Monotonic start-up into pre-biased outputs
  • Per channel (CHx)
    • Adjustable slope compensation (RSCx)
    • Adjustable soft-start (SS_TRx)
    • Power-good output monitor for undervoltage and overvoltage (PWRGDx)
    • Input enable (ENx)
  • Sequence up and reverse sequence down when using EN_SEQ (only valid for TPS7H4104)
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temp range

The TPS7H4104 and TPS7H4102 are 7V, 3A per channel, multichannel, peak-current mode, synchronous buck converters optimized for use in area sensitive, space environment applications. The device incorporates four (TPS7H4104) or two (TPS7H4102) identical channels that can be use to step down the power input voltage into independent voltages up to 3A per phase or interleaved to increment the output current up to 12A (TPS7H4104) or 6A (TPS7H4102).

Each channel incorporates the high-side and low-side power MOSFETs with programmable soft-start and slope compensation. Additionally, per channel power-good flags and enable signals are provided. The TPS7H4104 also includes an EN_SEQ input that enables a sequential power‑up and a reverse‑sequence power‑down.

Various current limit mechanisms are included for robust current limiting during fault conditions. Thermal shutdown disables the device when the die temperature exceeds thermal limit.

The TPS7H4104 and TPS7H4102 are 7V, 3A per channel, multichannel, peak-current mode, synchronous buck converters optimized for use in area sensitive, space environment applications. The device incorporates four (TPS7H4104) or two (TPS7H4102) identical channels that can be use to step down the power input voltage into independent voltages up to 3A per phase or interleaved to increment the output current up to 12A (TPS7H4104) or 6A (TPS7H4102).

Each channel incorporates the high-side and low-side power MOSFETs with programmable soft-start and slope compensation. Additionally, per channel power-good flags and enable signals are provided. The TPS7H4104 also includes an EN_SEQ input that enables a sequential power‑up and a reverse‑sequence power‑down.

Various current limit mechanisms are included for robust current limiting during fault conditions. Thermal shutdown disables the device when the die temperature exceeds thermal limit.

filter Andere DC/DC-Wandler suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 10
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet TPS7H410x-SP and TPS7H410x-SEP Radiation-Hardened, 3V to 7V Input, 3A per Channel, Multichannel, Synchronous Buck Converter datasheet (Rev. C) PDF | HTML 19 Nov 2025
* Radiation & reliability report TPS7H4104-SEP Total Ionizing Dose (TID) Report (Rev. B) 19 Nov 2025
* Radiation & reliability report TPS7H410x-SEP Production Flow and Reliability Report (Rev. A) PDF | HTML 14 Nov 2025
* Radiation & reliability report Single-Event Effects (SEE) Radiation Report of the TPS7H4104-SEP PDF | HTML 05 Nov 2025
* Radiation & reliability report TPS7H4104-SEP and TPS7H4104-SP QMLP Neutron Displacement Damage (NDD) Characterization Report (Rev. A) 17 Sep 2025
Application note Achieving High Accuracy Output Below VREF with Space-Grade Multi-channel Buck Converters PDF | HTML 17 Dez 2025
Selection guide TI Space Products (Rev. K) 04 Apr 2025
Technical article How Space Enhanced Products Address Challenges in low Earth orbit Applications (Rev. A) PDF | HTML 18 Dez 2023
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 15 Sep 2022
E-book Radiation Handbook for Electronics (Rev. A) 21 Mai 2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS7H4104EVM — TPS7H4104 – Evaluierungsmodul

Das Evaluierungsmodul (EVM) TPS7H4104 ist für 5 V Eingangsspannung mit vier separaten 3-A-Ausgängen optimiert. Jeder Wandler ist separat konfiguriert, sodass die Platine über einen 0,8-V-Ausgang, einen 1,2-V-Ausgang, einen 1,5-V-Ausgang und einen 1,8-V-Ausgang verfügt.

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Simulationsmodell

TPS7H4104 SIMPLIS Model (Rev. A)

SLVMED0A.ZIP (28 KB) - SIMPLIS Model
Herunterladen
Berechnungstool

TPS7H410X-CALC — TPS7H4104/2 component calculator

TPS7H4104 and TPS7H4102 component calculator
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTQFP (PAP) 64 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos