AM26LS33A-SP

Name: AM26LS33A-SP
Brand: TI
SKU: AM26LS33A-SP
Price: 223.06 USD

ACTIVO

Receptores de línea diferencial cuádruple QML clase V

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat Quadruple Differential Line Receiver. datasheet (Inglés)

AM26LS33A-SP

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of receivers

4

Number of transmitters

0

Duplex

Half

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-25 to 25

Common-mode range (V)

-15 to 15

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Space

Operating temperature range (°C)

-55 to 125

Number of receivers

4

Number of transmitters

0

Duplex

Half

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-25 to 25

Common-mode range (V)

-15 to 15

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Space

Operating temperature range (°C)

-55 to 125

CDIP (J)

16

135.3552 mm² 19.56 x 6.92

AM26LS33A Devices Meet or Exceed the Requirements of ANSI TIA/EIA-422-B,
TIA/EIA-423-B, and ITU Recommendations V.10 and V.11
±15-V Common-Mode Range With ±500-mV Sensitivity
Input Hysteresis . . . 50 mV Typical
Operate From a Single 5-V Supply
Low-Power Schottky Circuitry
3-State Outputs
Complementary Output-Enable Inputs
Input Impedance . . . 12 k Minimum
Designed to Be Interchangeable With Advanced Micro Device AM26LS33™
QML-V Qualified, SMD 5962-78020
Military Temperature Range (–55°C to 125°C)
Rad-Tolerant: 25 kRad (Si) TID⁽¹⁾

⁽¹⁾ Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.

AM26LS33A Devices Meet or Exceed the Requirements of ANSI TIA/EIA-422-B,
TIA/EIA-423-B, and ITU Recommendations V.10 and V.11
±15-V Common-Mode Range With ±500-mV Sensitivity
Input Hysteresis . . . 50 mV Typical
Operate From a Single 5-V Supply
Low-Power Schottky Circuitry
3-State Outputs
Complementary Output-Enable Inputs
Input Impedance . . . 12 k Minimum
Designed to Be Interchangeable With Advanced Micro Device AM26LS33™
QML-V Qualified, SMD 5962-78020
Military Temperature Range (–55°C to 125°C)
Rad-Tolerant: 25 kRad (Si) TID⁽¹⁾

⁽¹⁾ Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.

The AM26LS33A is a quadruple differential line receiver for balanced and unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design ensures that, if the inputs are open, the outputs always are high.

Compared to the AM26LS33, the AM26LS33A incorporates an additional stage of amplification to improve sensitivity. The input impedance has been increased, resulting in less loading of the bus line. The additional stage has increased propagation delay; however, this does not affect interchangeability in most applications.

The AM26LS33A is characterized for operation over the temperature range of –55°C to 125°C.

The AM26LS33A is a quadruple differential line receiver for balanced and unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design ensures that, if the inputs are open, the outputs always are high.

Compared to the AM26LS33, the AM26LS33A incorporates an additional stage of amplification to improve sensitivity. The input impedance has been increased, resulting in less loading of the bus line. The additional stage has increased propagation delay; however, this does not affect interchangeability in most applications.

The AM26LS33A is characterized for operation over the temperature range of –55°C to 125°C.

filter

Buscar otro/a Transceptores RS-485 y RS-422

Descargar