The ISO7240, ISO7241 and ISO7242 are quad-channel digital isolators with multiple channel configurations and output enable functions. These devices have logic input and output buffers separated by TI’s silicon dioxide (SiO2) isolation barrier. Used in conjunction with isolated power supplies, these devices block high voltage, isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging sensitive circuitry.
The ISO7240 has all four channels in the same direction while the ISO7241 has three channels the same direction and one channel in opposition. The ISO7242 has two channels in each direction.
The C option devices have TTL input thresholds and a noise-filter at the input that prevents transient pulses from being passed to the output of the device. The M option devices have CMOS VCC/2 input thresholds and do not have the input noise-filter or the additional propagation delay.
The ISO7240CF has an input disable function on pin 7, and a selectable high or low failsafe-output function with the CTRL pin (pin 10). The failsafe-output is a logic high when a logic-high is placed on the CTRL pin or it is left unconnected. If a logic-low signal is applied to the CTRL pin, the failsafe-output becomes a logic-low output state. The ISO7240CF input disable function prevents data from being passed across the isolation barrier to the output. When the inputs are disabled, the outputs are set by the CTRL pin.
These devices may be powered from either 3.3-V or 5-V supplies on either side in any 3.3-V / 3.3-V, 5-V / 5-V, 5-V / 3.3-V, or 3.3-V / 5-V combination. Note that the signal input pins are 5-V tolerant regardless of the voltage supply level being used.
These devices are characterized for operation over the ambient temperature range of –40°C to 125°C.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | ISO724xC-Q1/ISO7240CF-Q1 High-Speed Quad Digital Isolators datasheet (Rev. A) | 23 sep 2011 | |
| Certificate | VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. W) | 31 ene 2024 | ||
| White paper | Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. C) | PDF | HTML | 07 sep 2023 | |
| Certificate | CSA Certificate for ISO72xxDW | 22 feb 2023 | ||
| Certificate | UL Certificate of Compliance File E181974 Vol 4 Sec 1 (Rev. A) | 05 ago 2022 | ||
| White paper | Why are Digital Isolators Certified to Meet Electrical Equipment Standards? | 16 nov 2021 | ||
| White paper | Distance Through Insulation: How Digital Isolators Meet Certification Requiremen | PDF | HTML | 11 jun 2021 | |
| Application brief | How to Replace Optocouplers with Digital Isolators in Standard Interface Circuit (Rev. A) | PDF | HTML | 19 may 2021 | |
| EVM User's guide | Universal Digital Isolator Evaluation Module | PDF | HTML | 04 mar 2021 | |
| Application brief | Considerations for Selecting Digital Isolators | 24 jul 2018 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
El DIGI-ISO-EVM es un módulo de evaluación (EVM) que se utiliza para evaluar cualquiera de los dispositivos aisladores digitales de un canal, dos canales, tres canales, cuatro canales o seis canales de TI en cinco encapsulados diferentes: SOIC de estructura estrecha (D) de 8 pines, SOIC de (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOIC (DW) | 16 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.