SM72480

ACTIVO

Interruptor de temperatura preajustado de fábrica y sensor de temperatura LLP-6 de 1.6 V

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 1.6V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor datasheet (Rev. C) (Inglés)

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Reemplazo con funcionalidad mejorada del dispositivo comparado

LM26LV

ACTIVO

Interruptor de temperatura de punto de disparo predeterminado de fábrica de ±3 °C y capacidad de Additional trip-point options, ranging from 50°C to 150°C

SM72480

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Setpoint type

Factory Programmed

Setpoint value (°C)

105, 120, 125

Operating temperature range (°C)

-50 to 150

Accuracy over temp range (max) (°C)

2.3

Sensor gain (mV/°C)

-10.3, -7.7

Output type

Open drain, Push Pull

Supply voltage (min) (V)

1.6

Supply voltage (max) (V)

5.5

Supply current (typ) (µA)

8

Number of comparator channels

1

Rating

Automotive, Catalog

Interface type

Analog output, Switch

Setpoint type

Factory Programmed

Setpoint value (°C)

105, 120, 125

Operating temperature range (°C)

-50 to 150

Accuracy over temp range (max) (°C)

2.3

Sensor gain (mV/°C)

-10.3, -7.7

Output type

Open drain, Push Pull

Supply voltage (min) (V)

1.6

Supply voltage (max) (V)

5.5

Supply current (typ) (µA)

8

Number of comparator channels

1

Rating

Automotive, Catalog

Interface type

Analog output, Switch

WSON (NGF)

6

5.5 mm² 2.5 x 2.2

Renewable Energy Grade
Low 1.6V Operation
Latching Function: Device Can Latch the Over Temperature Condition
Push-pull and Open-Drain Temperature Switch Outputs
Very Linear Analog V_TEMP Temperature Sensor Output
V_TEMP Output Short-circuit Protected
2.2 mm by 2.5 mm (typ) WSON-6 Package
Excellent Power Supply Noise Rejection

Key Specifications

Supply Voltage 1.6V to 5.5V
Supply Current 8 μA (typ)
Accuracy, Trip Point Temperature 0°C to 150°C ±2.2°C
Accuracy, VTEMP 0°C to 150°C ±2.3°C
VTEMP Output Drive ±100 μA
Operating Temperature −50°C to 150°C
Hysteresis Temperature 4.5°C to 5.5°C

All trademarks are the property of their respective owners.

Renewable Energy Grade
Low 1.6V Operation
Latching Function: Device Can Latch the Over Temperature Condition
Push-pull and Open-Drain Temperature Switch Outputs
Very Linear Analog V_TEMP Temperature Sensor Output
V_TEMP Output Short-circuit Protected
2.2 mm by 2.5 mm (typ) WSON-6 Package
Excellent Power Supply Noise Rejection

Key Specifications

Supply Voltage 1.6V to 5.5V
Supply Current 8 μA (typ)
Accuracy, Trip Point Temperature 0°C to 150°C ±2.2°C
Accuracy, VTEMP 0°C to 150°C ±2.3°C
VTEMP Output Drive ±100 μA
Operating Temperature −50°C to 150°C
Hysteresis Temperature 4.5°C to 5.5°C

All trademarks are the property of their respective owners.

The SM72480 is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (T_TRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (T_HYST) keeps the output stable in an environment of temperature instability.

In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds T_TRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (T_TRIP − T_HYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the OVERTEMP digital output, is active-low with an open-drain structure.

The analog output, V_TEMP, delivers an analog output voltage with Negative Temperature Coefficient — NTC.

Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the V_TEMP output pin, which could be used to verify the temperature trip point.

The SM72480's low minimum supply voltage makes it ideal for 1.8 volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.

The SM72480 is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (T_TRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (T_HYST) keeps the output stable in an environment of temperature instability.

In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds T_TRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (T_TRIP − T_HYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the OVERTEMP digital output, is active-low with an open-drain structure.

The analog output, V_TEMP, delivers an analog output voltage with Negative Temperature Coefficient — NTC.

Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the V_TEMP output pin, which could be used to verify the temperature trip point.

The SM72480's low minimum supply voltage makes it ideal for 1.8 volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.

filter

Buscar otro/a Interruptores por temperatura

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

	Tipo	Título		Fecha
*	Data sheet	1.6V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor datasheet (Rev. C)		05 abr 2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.