Inicio Interfaz Circuitos integrados Ethernet Capa física (PHY) Ethernet
Inicio
Interfaz
Circuitos integrados Ethernet
Capa física (PHY) Ethernet

TLK100

NO RECOMENDADO PARA NUEVOS DISEÑOS

PHY Ethernet industrial

Haga su pedido ahora
Hoja de datos

TLK100

NO RECOMENDADO PARA NUEVOS DISEÑOS
Hoja de datos Haga su pedido ahora

Detalles del producto

Datarate (Mbps) 10/100 Interface type MII Number of ports Single Rating Catalog Features Cable diagnostics, JTAG1149.1 Supply voltage (V) 3.3 Operating temperature range (°C) -40 to 85 Number of LEDs 3 ESD HBM (kV) 16
Datarate (Mbps) 10/100 Interface type MII Number of ports Single Rating Catalog Features Cable diagnostics, JTAG1149.1 Supply voltage (V) 3.3 Operating temperature range (°C) -40 to 85 Number of LEDs 3 ESD HBM (kV) 16
HTQFP (PHP) 48 81 mm² 9 x 9
  • Temperature From –40°C to 85°C
  • Low Power Consumption, < 200mW Typical
  • Cable Diagnostics
  • Error-Free Operation up to 200 Meters Under Typical Conditions
  • 3.3V MAC Interface
  • Auto-MDIX for 10/100 Mb/s
  • Energy Detection Mode
  • 25 MHz Clock Out
  • MII Serial Management Interface (MDC and MDIO)
  • IEEE 802.3u MII
  • IEEE 802.3u Auto-Negotiation and Parallel Detection
  • IEEE 802.3u ENDEC, 10BASE-T Transceivers and Filters
  • Bus I/O Protection - ±16kV JEDEC HBM
  • IEEE 802.3u PCS, 100BASE-TX Transceivers
  • Enables IEEE1588 Time-Stamping
  • IEEE 1149.1 JTAG
  • Integrated ANSI X3.263 Compliant TP-PMD Physical Sublayer with
    Adaptive Equalization and Baseline Wander Compensation
  • Programmable LED Support Link, 10/100 Mb/s Mode, Activity,
    and Collision Detect
  • 10/100 Mb/s Packet BIST (Built in Self Test)
  • 48-pin TQFP Package (7mm) × (7mm)
  • Applications
    • Industrial Controls and Factory Automation
    • General Embedded Applications
  • Temperature From –40°C to 85°C
  • Low Power Consumption, < 200mW Typical
  • Cable Diagnostics
  • Error-Free Operation up to 200 Meters Under Typical Conditions
  • 3.3V MAC Interface
  • Auto-MDIX for 10/100 Mb/s
  • Energy Detection Mode
  • 25 MHz Clock Out
  • MII Serial Management Interface (MDC and MDIO)
  • IEEE 802.3u MII
  • IEEE 802.3u Auto-Negotiation and Parallel Detection
  • IEEE 802.3u ENDEC, 10BASE-T Transceivers and Filters
  • Bus I/O Protection - ±16kV JEDEC HBM
  • IEEE 802.3u PCS, 100BASE-TX Transceivers
  • Enables IEEE1588 Time-Stamping
  • IEEE 1149.1 JTAG
  • Integrated ANSI X3.263 Compliant TP-PMD Physical Sublayer with
    Adaptive Equalization and Baseline Wander Compensation
  • Programmable LED Support Link, 10/100 Mb/s Mode, Activity,
    and Collision Detect
  • 10/100 Mb/s Packet BIST (Built in Self Test)
  • 48-pin TQFP Package (7mm) × (7mm)
  • Applications
    • Industrial Controls and Factory Automation
    • General Embedded Applications

The TLK100 is a single-port Ethernet PHY for 10BaseT and 100Base TX signaling. It integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. This device supports the standard Media Independent Interface (MII) for direct connection to a Media Access Controller (MAC).

The TLK100 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V, 1.8V, and 1.1V power supplies for reduced power operation.

The TLK100 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. It not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.

The TLK100 is a single-port Ethernet PHY for 10BaseT and 100Base TX signaling. It integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. This device supports the standard Media Independent Interface (MII) for direct connection to a Media Access Controller (MAC).

The TLK100 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V, 1.8V, and 1.1V power supplies for reduced power operation.

The TLK100 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. It not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
filter Buscar otro/a Capa física (PHY) Ethernet
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet Industrial Ethernet PHY datasheet (Rev. B) 09 oct 2009

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje