TPS82740B

Name: TPS82740B
Brand: TI
SKU: TPS82740B
Price: 1 USD

アクティブ

360nA の静止電流 (Iq)、200mA 降圧コンバータモジュール

ご注文はこちら

データシート

document-pdfAcrobat TPS82740x 360-nA IQ MicroSIPTM Step Down Converter Module for Low Power Applications データシート (Rev. A) (英語) PDF | HTML

TPS82740B

アクティブ

データシート

ご注文はこちら

製品詳細

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck, Synchronous Buck

Type

Module

Iout (max) (A)

0.2

Vin (min) (V)

2.2

Vin (max) (V)

5.5

Vout (min) (V)

2.6

Vout (max) (V)

3.3

Switching frequency (min) (kHz)

700

Switching frequency (max) (kHz)

1200

EMI features

Integrated capacitors

Features

Dynamic Voltage Scaling, EMI Tested, Enable, Integrated Switch, Light Load Efficiency, Load Disconnect, Output discharge, Overcurrent protection

Control mode

Constant on-time (COT), DCS-Control

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck, Synchronous Buck

Type

Module

Iout (max) (A)

0.2

Vin (min) (V)

2.2

Vin (max) (V)

5.5

Vout (min) (V)

2.6

Vout (max) (V)

3.3

Switching frequency (min) (kHz)

700

Switching frequency (max) (kHz)

1200

EMI features

Integrated capacitors

Features

Dynamic Voltage Scaling, EMI Tested, Enable, Integrated Switch, Light Load Efficiency, Load Disconnect, Output discharge, Overcurrent protection

Control mode

Constant on-time (COT), DCS-Control

Duty cycle (max) (%)

100

uSIP (SIP)

9

7.395 mm² 2.55 x 2.9

360-nA Typical Quiescent Current
Up to 90% Efficiency at 10-µA Output Current
Pin-Selectable Output Voltages in 100-mV Steps
Integrated Slew Rate Controlled Load Switch
Up to 200-mA Output Current
Input Voltage Range V_IN from 2.2 V to 5.5 V
RF Friendly DCS-Control™
Low Output Voltage Ripple
Automatic Transition to No Ripple 100% Mode
Discharge Function on VOUT and LOAD
Sub 1.1-mm Profile Solution
Total Solution Size < 6.7mm²
Small 2.3 mm × 2.9 mm MicroSIP™ Package

360-nA Typical Quiescent Current
Up to 90% Efficiency at 10-µA Output Current
Pin-Selectable Output Voltages in 100-mV Steps
Integrated Slew Rate Controlled Load Switch
Up to 200-mA Output Current
Input Voltage Range V_IN from 2.2 V to 5.5 V
RF Friendly DCS-Control™
Low Output Voltage Ripple
Automatic Transition to No Ripple 100% Mode
Discharge Function on VOUT and LOAD
Sub 1.1-mm Profile Solution
Total Solution Size < 6.7mm²
Small 2.3 mm × 2.9 mm MicroSIP™ Package

The TPS82740 is the industry’s first step-down converter module featuring typically 360-nA quiescent current consumption. It is a complete MicroSIP^TM DC/DC step-down power solution intended for ultra low-power applications. The module includes the switching regulator, inductor and input/output capacitors. The integration of all required passive components enables a tiny solution size of only 6.7 mm².

This new DCS-Control™ based device extends the light load efficiency range below 10-µA load currents. It supports output currents up to 200 mA.

The device operates from rechargeable Li-Ion batteries, Li-primary battery chemistries such as Li-SOCl2, Li-MnO2 and two or three cell alkaline batteries. The input voltage range up to 5.5 V also allows operation from an USB port and thin-film solar modules.

The output voltage is user selectable by three voltage select pins (VSEL), within a range from 1.8 V to 2.5 V (TPS82740A) and 2.6 V to 3.3 V (TPS82740B) in 100-mV steps. The TPS82740 features low output voltage ripple and low noise. Once the battery voltage comes close to the output voltage (close to 100% duty cycle), the device enters no ripple 100% mode operation preventing an increase of output voltage ripple. In this case the device stops switching and the output is connected to the input voltage.

The integrated slew rate controlled load switch with a typical ON-resistance of 0.6Ω distributes the selected output voltage to a temporarily used sub-system.

The TPS82740 is available in a small 9-bump 6.7 mm² MicroSiP™ package.

The TPS82740 is the industry’s first step-down converter module featuring typically 360-nA quiescent current consumption. It is a complete MicroSIP^TM DC/DC step-down power solution intended for ultra low-power applications. The module includes the switching regulator, inductor and input/output capacitors. The integration of all required passive components enables a tiny solution size of only 6.7 mm².

This new DCS-Control™ based device extends the light load efficiency range below 10-µA load currents. It supports output currents up to 200 mA.

The device operates from rechargeable Li-Ion batteries, Li-primary battery chemistries such as Li-SOCl2, Li-MnO2 and two or three cell alkaline batteries. The input voltage range up to 5.5 V also allows operation from an USB port and thin-film solar modules.

The output voltage is user selectable by three voltage select pins (VSEL), within a range from 1.8 V to 2.5 V (TPS82740A) and 2.6 V to 3.3 V (TPS82740B) in 100-mV steps. The TPS82740 features low output voltage ripple and low noise. Once the battery voltage comes close to the output voltage (close to 100% duty cycle), the device enters no ripple 100% mode operation preventing an increase of output voltage ripple. In this case the device stops switching and the output is connected to the input voltage.

The integrated slew rate controlled load switch with a typical ON-resistance of 0.6Ω distributes the selected output voltage to a temporarily used sub-system.

The TPS82740 is available in a small 9-bump 6.7 mm² MicroSiP™ package.

filter

その他のパワーモジュール (インダクタ内蔵) を検索

ダウンロード字幕付きのビデオを表示ビデオ

お客様が関心を持ちそうな類似品

open-in-new

代替品と比較

比較対象デバイスと同等の機能で、ピン配置が異なる製品

TPS82695

アクティブ

500mA、高効率 MicroSiP™ 降圧コンバータ (厚さ 1mm 未満)Vout=2.5V Check out the TPS82695 for a module with higher output current.

TPS82698

アクティブ

700mA、高効率 MicroSiP™ 降圧コンバータ (厚さ 1mm 未満) Check out the TPS82698 for a module with higher output current.

新規 TPSM82843

プレビュー

インダクタ内蔵、275nA の静止電流 (IQ)、0.4V ～ 3.6V の選択可能な出力電圧範囲 (VOUT)、600mA 降圧コンバータモジュール Lower IQ and higher output current

技術資料

star

=TI が選定したこの製品の主要ドキュメント

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。

12 をすべて表示

	種類	タイトル		日付
*	データシート	TPS82740x 360-nA IQ MicroSIPTM Step Down Converter Module for Low Power Applications データシート (Rev. A)	PDF \| HTML	2014年 6月 11日
	アプリケーション・ノート	Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B)	PDF \| HTML	2022年 5月 23日
	ユーザー・ガイド	Manufacturing and Rework Design Guide for MicroSiP™ Power Modules (Rev. A)	PDF \| HTML	2021年 6月 16日
	ホワイト・ペーパー	Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies		2019年 10月 14日
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		2019年 6月 14日
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		2018年 6月 22日
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		2016年 10月 24日
	ホワイト・ペーパー	SiP Power Modules White Paper		2016年 1月 26日
	Analog Design Journal	Understanding frequency variation in the DCS-Control(TM) topology		2015年 10月 30日
	EVM ユーザーガイド (英語)	TPS82740xSIPEVM-617 User's Guide		2014年 6月 10日
	Analog Design Journal	High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions		2013年 7月 25日
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		2011年 6月 17日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS82740AEVM-617 — TPS82740ASIP 超低 Iq、完全統合型降圧コンバータ用評価モジュール

The TPS82740AEVM-617 is designed to help the user easily evaluate and test the operation and functionality of the Fully Integrated TPS82740A Power Module. The EVM converts a 2.2-V to 5.5-V input voltage to a regulated output voltage that is set between 1.8 V and 2.5 V at up to 200 mA. The (...)

ユーザーガイド: PDF

TI.com で取り扱いなし

評価ボード

TPS82740BEVM-617 — 降圧コンバータ MicroSIP モジュール、静止電流付き、評価モジュール

The TPS82740BEVM-617 is designed to help the user easily evaluate and test the operation and functionality of the Fully Integrated TPS82740B Power Module. The EVM converts a 2.2-V to 5.5-V input voltage to a regulated output voltage that is set between 2.6 V and 3.3 V at up to 200 mA. The (...)

ユーザーガイド: PDF