BQ79612-Q1
- Qualified for automotive applications
- AEC-Q100 Qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Functional Safety-Compliant
- Developed for functional safety applications
- Documentation to aid ISO 26262 system design
- Systematic capability up to ASIL D
- Hardware capability up to ASIL D
- +/- 1.5mV ADC accuracy
- Pin-package and software compatible device family:
- Stackable monitor 16S (BQ79616-Q1, BQ79616H-Q1, BQ79656-Q1) , 14S (BQ79614-Q1, BQ79654-Q1), and 12S (BQ79612-Q1, BQ79652-Q1)
- Standalone monitor 48 V system (BQ75614-Q1)
- Built-in redundancy path for voltage and temperature diagnostics
- Highly accurate cell voltage measurements within 128 µs for all cell channels
- Integrated post-ADC configurable digital low-pass filters
- Supports bus bar connection and measurement
- Built-in host-controlled hardware reset to emulate POR-like device reset
- Supports internal cell balancing
- Balancing current at 240 mA
- Built-in balancing thermal management with automatic pause and resume control
- Isolated differential daisy chain communication with optional ring architecture
- Embedded fault signal and heartbeat through communication line
- UART/SPI host interface/communication bridge device BQ79600-Q1
- Built-in SPI master
BQ79612-Q1, BQ79614-Q1, BQ79616-Q1 and BQ79616H-Q1 provide high-accuracy cell voltage measurements in less than 200 µs for 12S, 14S and 16S battery modules in high-voltage battery management systems in HEV/EV. The family of monitors offers different channel options in the same package type, providing pin-to-pin compatibility and supporting high reuse of the established software and hardware across any platform. The integrated front-end filters enable the system to implement with simple, low voltage rating, differential RC filters on the cell input channels. The integrated, post-ADC, low-pass filters enable filtered, DC-like, voltage measurements for better state of charge (SOC) calculation. This device supports autonomous internal cell balancing with temperature monitoring to auto-pause and resume balancing to avoid an overtemperature condition.
The inclusion of the isolated, bidirectional, daisy chain ports supports both capacitor- and transformer-based isolation, allowing the use of the most effective components for centralized or distribution architectures commonly found in the xEV powertrain system. This device also includes eight GPIOs or auxiliary inputs that can be used for external thermistor measurements.
Host communication to the BQ7961x-Q1 family of devices can be connected via the devices dedicated UART interface or through a communication bridge device, BQ79600. Additionally, an isolated, differential daisy-chain communication interface allows the host to communicate with the entire battery stack over a single interface. in the event of a communication line break, the daisy-chain communication interface is configurable to a ring architecture that allows the host to talk to devices at either end of the stack.
All references to the BQ79616-Q1 device also apply to the BQ79616H-Q1 device.
![정보](https://www.ti.com/content/dam/ticom/images/icons/illustrative-icons/resources/information-icon.png)
추가 정보 요청
설계 권장 사항 및 애플리케이션 노트를 사용할 수 있습니다. 지금 요청
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | BQ79616-Q1, BQ79616H-Q1, BQ79614-Q1, BQ79612-Q1Functional Safety-Compliant Automotive 16S/14S/12S Battery Monitor, Balancer and Integrated Hardware Protector datasheet (Rev. E) | PDF | HTML | 2023/11/06 |
Application note | BQ79616-Q1 Daisy Chain Communications | PDF | HTML | 2023/10/26 | |
Application note | BQ7961x-Q1 Design Recommendations for High Voltage Automotive BMS (Rev. A) | PDF | HTML | 2023/10/19 | |
Application note | BQ79616-Q1 Software Design Reference (Rev. B) | PDF | HTML | 2023/08/21 | |
Technical article | Intelligent junction box with voltage and current synchronization in EVs | PDF | HTML | 2022/04/08 | |
User guide | BQ79616-Q1 and BQ75614-Q1 Graphical User Interface (GUI) User's Guide | 2020/12/14 | ||
Technical article | Conserve battery power in HEV/EVs with automatic host reverse wakeup | PDF | HTML | 2020/12/04 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ79616EVM-021 — 16-S 오토모티브 배터리 모니터, 밸런서 및 통합 보호기용 BQ79616 평가 모듈
BQ79616 평가 모듈(EVM)은 BQ79616-Q1용 개발 플랫폼입니다. BQ79616-Q1은 6~16개의 배터리 셀에 대한 높은 정확도와 채널 측정을 제공합니다. 데이지 체인 통신 포트가 포함된 BQ79616-Q1은 전기 자동차 드라이브 트레인용 배터리 팩에 들어 있는 대용량 스택 구성을 지원할 수 있는 적층형(장치 최대 35대) 장치입니다.
BQ7X61X-Q1-DEVELOPMENT — BQ7x61x-Q1 development files
지원되는 제품 및 하드웨어
제품
배터리 모니터 및 밸런서
BQ7X61X-Q1-EVALUATION — BQ7x61x-Q1 evaluation files
지원되는 제품 및 하드웨어
제품
배터리 모니터 및 밸런서
BQ7X61X-Q1-FMEDA — BQ7x61x-Q1 FMEDA files
지원되는 제품 및 하드웨어
제품
배터리 모니터 및 밸런서
BQ7X61X-Q1-FUNCTIONAL-SAFETY-DOCS — BQ7x61x-Q1 functional safety documents
지원되는 제품 및 하드웨어
제품
배터리 모니터 및 밸런서
MNOVA-3P-NOVACARTS — MicroNova NovaCarts cell module controller (CMC) simulator for validating battery management systems
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
HTQFP (PAP) | 64 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.