CDCI6214은(는) 새 설계에 권장하지 않습니다.
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
CDCE6214 활성 PLL 1개, 차동 출력 4개를 지원하는 초저전력 클록 생성기 Pin-to-pin, PCIe-Gen-5-compliant upgrade, LP-HCSL output and fractional PLL support with lower 1ku price
비교 대상 장치와 유사한 기능
CDCM6208 활성 2:8 초저전력, 저지터 클록 제너레이터 Ultra-low power, 365-fs RMS (typical), clock generator device for fractional or integer divided differential outputs

제품 상세 정보

Function Clock generator Number of outputs 4 Output frequency (max) (MHz) 350 Core supply voltage (V) 1.8, 2.5, 3.3 Output supply voltage (V) 1.8, 2.5, 3.3 Input type Differential, LVCMOS, XTAL Output type HCSL, LVCMOS, LVDS, LVPECL Operating temperature range (°C) -40 to 85 Features I2C, Integrated EEPROM, Pin programmable, Serial interface Rating Catalog
Function Clock generator Number of outputs 4 Output frequency (max) (MHz) 350 Core supply voltage (V) 1.8, 2.5, 3.3 Output supply voltage (V) 1.8, 2.5, 3.3 Input type Differential, LVCMOS, XTAL Output type HCSL, LVCMOS, LVDS, LVPECL Operating temperature range (°C) -40 to 85 Features I2C, Integrated EEPROM, Pin programmable, Serial interface Rating Catalog
  • One configurable high performance, low-power PLL with four programmable outputs
  • RMS jitter performance
    • Supports PCIe Gen1/ Gen2 / Gen3 / Gen4 without SSC
  • Typical power consumption: 150mW at 1.8V(2)
  • Universal clock input
    • Differential AC-coupled or LVCMOS: 1MHz to 250MHz
    • Crystal: 8MHz to 50MHz
  • Flexible output frequencies
    • 44.1kHz to 350MHz
    • Glitchless output divider switching
  • Four individually configurable outputs
    • LVCMOS, LVDS or HCSL
    • Differential AC-coupled with programmable swing (LVDS-, CML-, LVPECL-compatible)
  • Fully integrated PLL, configurable loop bandwidth: 100kHz to 3MHz
  • Single or mixed supply operation for level translation: 1.8V, 2.5V and 3.3V
  • Configurable GPIOs
    • Status signals
    • Up to four individual output enables
    • Output divider synchronization
  • Flexible configuration options
    • I2C-compatible interface: up to 400kHz
    • Integrated EEPROM with two pages and external select pin
  • Only supports 100Ω systems
  • Industrial temperature range: –40°C to 85°C
  • Small footprint: 24-pin VQFN (4mm × 4mm)
  • One configurable high performance, low-power PLL with four programmable outputs
  • RMS jitter performance
    • Supports PCIe Gen1/ Gen2 / Gen3 / Gen4 without SSC
  • Typical power consumption: 150mW at 1.8V(2)
  • Universal clock input
    • Differential AC-coupled or LVCMOS: 1MHz to 250MHz
    • Crystal: 8MHz to 50MHz
  • Flexible output frequencies
    • 44.1kHz to 350MHz
    • Glitchless output divider switching
  • Four individually configurable outputs
    • LVCMOS, LVDS or HCSL
    • Differential AC-coupled with programmable swing (LVDS-, CML-, LVPECL-compatible)
  • Fully integrated PLL, configurable loop bandwidth: 100kHz to 3MHz
  • Single or mixed supply operation for level translation: 1.8V, 2.5V and 3.3V
  • Configurable GPIOs
    • Status signals
    • Up to four individual output enables
    • Output divider synchronization
  • Flexible configuration options
    • I2C-compatible interface: up to 400kHz
    • Integrated EEPROM with two pages and external select pin
  • Only supports 100Ω systems
  • Industrial temperature range: –40°C to 85°C
  • Small footprint: 24-pin VQFN (4mm × 4mm)

The CDCI6214 device is an ultra-low power clock generator. The device selects between two independent reference inputs to a phase-locked loop and generates up to four different frequencies on configurable differential output channels and also a copy of the reference clock on a LVCMOS output channel.

Each of the four output channels has a configurable integer divider. Together with the output muxes, this allows up to five different frequencies. Clock distribution dividers are reset in a deterministic way for clean clock gating and glitch-less update capability. Flexible power-down options allow to optimize the device for lowest power consumption in active and standby operation. Typically four 156.25MHz LVDS outputs consume 150mW at 1.8V. Typical RMS jitter of 386fs for 100MHz HCSL output enhances system margin for PCIe applications.

The CDCI6214 is configured using internal registers that are accessed by an I2C-compatible serial interface and internal EEPROM.

The CDCI6214 enables high-performance clock trees from a single reference at ultra-low power with a small footprint. The factory- and user-programmable EEPROM of the CDCI6214 is designed as an easy-to-use, instant-on clocking feature with low power consumption.

The CDCI6214 device is an ultra-low power clock generator. The device selects between two independent reference inputs to a phase-locked loop and generates up to four different frequencies on configurable differential output channels and also a copy of the reference clock on a LVCMOS output channel.

Each of the four output channels has a configurable integer divider. Together with the output muxes, this allows up to five different frequencies. Clock distribution dividers are reset in a deterministic way for clean clock gating and glitch-less update capability. Flexible power-down options allow to optimize the device for lowest power consumption in active and standby operation. Typically four 156.25MHz LVDS outputs consume 150mW at 1.8V. Typical RMS jitter of 386fs for 100MHz HCSL output enhances system margin for PCIe applications.

The CDCI6214 is configured using internal registers that are accessed by an I2C-compatible serial interface and internal EEPROM.

The CDCI6214 enables high-performance clock trees from a single reference at ultra-low power with a small footprint. The factory- and user-programmable EEPROM of the CDCI6214 is designed as an easy-to-use, instant-on clocking feature with low power consumption.

다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet CDCI6214 Ultra-Low Power Clock Generator With PCIe Support, Four Programmable Outputs and EEPROM datasheet (Rev. F) PDF | HTML 2024/01/31

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치