DRV81004-Q1
- 3V to 40V Analog supply voltage
- Cranking capability down to 3V
- Supports LV124 standard
- 3V to 5.5V Digital supply voltage
- Compatible with 3.3V and 5V microcontrollers
- 44V minimum drain to source clamping voltage
-
RDS(ON): 630mΩ typical at 12V, 25 °C
-
Current: 470mA per output at 85 °C, with all channels ON
-
2 parallel inputs with mapping functionality
-
Fail-safe activation in Limp Home mode
-
Using nSLEEP and IN pins
-
-
Low-current sleep mode
-
< 3µA using nSLEEP pin
-
-
16-bit SPI interface for control and diagnosis
-
Daisy Chain capability
-
Compatible with 8-bit SPI devices
-
-
Supports various protection features -
-
Reverse battery protection
-
Short circuit to ground and battery protection
-
Stable behavior at under voltage conditions
-
Over Current latch OFF
-
Overtemperature warning
-
Thermal shutdown latch OFF
-
Overvoltage protection
-
Loss of battery and loss of ground protection
-
Electrostatic discharge (ESD) protection
-
-
Supports several diagnostic features -
-
Diagnostic information via SPI register
-
Over Load detection in ON state
-
Open Load detection in OFF state
-
Input and Output Status Monitor
-
The DRV81004-Q1 is a four channel low-side driver with integrated protection and diagnostic features. The device is specially designed to control relays in automotive and industrial applications.
A serial peripheral interface (SPI) with daisy chain capability is utilized for control and diagnosis of the loads as well as of the device. Two input pins with mapping functionality are available for direct PWM control of the outputs. The device supports Limp Home mode for fail-safe activation.
Each low-side switch of the DRV81004-Q1 has 630mΩ ON resistance. The device can support 470mA current per output when all the eight channels are ON simultaneously. Integrated clamp circuits on each output dissipates the stored energy when turning OFF inductive loads.
The DRV81004-Q1 supports various protection features such as undervoltage, overvoltage, short circuit and open load detection. High level of integration with embedded protection and diagnostic features make the DRV81004-Q1 an excellent choice for automotive body and powertrain applications.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DRV81004-Q1: 4-channel Low-side Driver for Relay Control datasheet | PDF | HTML | 2024/08/22 |
| EVM User's guide | DRV81xxx-Q1 Evaluation Module User's Guide | PDF | HTML | 2024/07/22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV81004-Q1EVM — DRV81004-Q1 평가 모듈
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 14 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.