LM2596

활성

SIMPLE SWITCHER® 4.5V~40V, 3A 적은 부품 수의 스탭다운 레귤레이터

지금 주문

데이터 시트

document-pdfAcrobat LM2596 SIMPLE SWITCHER® Power Converter 150-kHz 3-A Step-Down Voltage Regulator datasheet (Rev. G) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

LMR51430

활성

40µA IQ를 지원하는 SIMPLE SWITCHER® 4.5V~36V, 3A 동기 벅 컨버터 Next-generation with lower IQ.

TLVM13630

활성

고밀도, 3V~36V 입력, 1V~16V 출력, 3A 스텝다운 전원 모듈 Save board space, simplify design and speed time to market with an integrated-inductor power module.

TPSM63603

활성

고밀도, 3V~36V 입력, 1V~16V 출력, 3A 전원 모듈 Next-generation with spread spectrum and frequency synchronization.

LM2596

활성

데이터 시트

지금 주문

제품 상세 정보

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

4.5

Vin (max) (V)

40

Switching frequency (min) (kHz)

110

Switching frequency (max) (kHz)

173

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

37

Iq (typ) (µA)

5000

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

4.5

Vin (max) (V)

40

Switching frequency (min) (kHz)

110

Switching frequency (max) (kHz)

173

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

37

Iq (typ) (µA)

5000

Duty cycle (max) (%)

100

TO-220 (NDH)

5

86.0552 mm² 10.16 x 8.47

TO-220 (NEB)

5

86.0552 mm² 10.16 x 8.47

TO-263 (KTT)

5

154.8384 mm² 10.16 x 15.24

New product available:
- LMR51430 4.5 to 36-V, 3-A, 500-kHz and 1.1-MHz synchronous converter
For faster time to market:
- TLVM13630 3 to 36-V, 3-A, 200-kHz to 2.2-MHz power module
3.3-V, 5-V, 12-V, and adjustable output versions
Adjustable version output voltage range: 1.2-V to 37-V ±4% maximum over line and load conditions
Available in TO-220 and TO-263 packages
3-A output load current
Input voltage range up to 40 V
Requires only four external components
Excellent line and load regulation specifications
150-kHz fixed-frequency internal oscillator
TTL shutdown capability
Low power standby mode, I Q, typically 80 µA
High efficiency
Uses readily available standard inductors
Thermal shutdown and current-limit protection
Create a custom design using the LM2596 with the WEBENCH Power Designer

New product available:
- LMR51430 4.5 to 36-V, 3-A, 500-kHz and 1.1-MHz synchronous converter
For faster time to market:
- TLVM13630 3 to 36-V, 3-A, 200-kHz to 2.2-MHz power module
3.3-V, 5-V, 12-V, and adjustable output versions
Adjustable version output voltage range: 1.2-V to 37-V ±4% maximum over line and load conditions
Available in TO-220 and TO-263 packages
3-A output load current
Input voltage range up to 40 V
Requires only four external components
Excellent line and load regulation specifications
150-kHz fixed-frequency internal oscillator
TTL shutdown capability
Low power standby mode, I Q, typically 80 µA
High efficiency
Uses readily available standard inductors
Thermal shutdown and current-limit protection
Create a custom design using the LM2596 with the WEBENCH Power Designer

The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation, and a fixed-frequency oscillator.

The LM2596 series operates at a switching frequency of 150 kHz, thus allowing smaller sized filter components than what can be required with lower frequency switching regulators. Available in a standard 5-pin TO-220 package with several different lead bend options, and a 5-pin TO-263 surface mount package.

A standard series of inductors are available from several different manufacturers optimized for use with the LM2596 series. This feature greatly simplifies the design of switch-mode power supplies.

Other features include a ±4% tolerance on output voltage under specified input voltage and output load conditions, and ±15% on the oscillator frequency. External shutdown is included, featuring typically 80 µA standby current. Self-protection features include a two stage frequency reducing current limit for the output switch and an overtemperature shutdown for complete protection under fault conditions.

The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation, and a fixed-frequency oscillator.

The LM2596 series operates at a switching frequency of 150 kHz, thus allowing smaller sized filter components than what can be required with lower frequency switching regulators. Available in a standard 5-pin TO-220 package with several different lead bend options, and a 5-pin TO-263 surface mount package.

A standard series of inductors are available from several different manufacturers optimized for use with the LM2596 series. This feature greatly simplifies the design of switch-mode power supplies.

Other features include a ±4% tolerance on output voltage under specified input voltage and output load conditions, and ±15% on the oscillator frequency. External shutdown is included, featuring typically 80 µA standby current. Self-protection features include a two stage frequency reducing current limit for the output switch and an overtemperature shutdown for complete protection under fault conditions.

filter

기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

22개 모두 보기

	유형	직함		날짜
*	Data sheet	LM2596 SIMPLE SWITCHER® Power Converter 150-kHz 3-A Step-Down Voltage Regulator datasheet (Rev. G)	PDF \| HTML	2023/03/22
	Application note	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	2024/03/25
	Technical article	How to increase system reliability and simplify design using DC/DC converters	PDF \| HTML	2016/06/13
	Technical article	The importance of accurate switching frequency and current limit when selecting bu	PDF \| HTML	2016/04/19
	Technical article	Advantages of leaded packages in robust industrial designs	PDF \| HTML	2016/03/08
	Application note	Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)		2014/09/12
	Application note	AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)		2013/04/24
	Application note	AN-1081 Low-Cost Low-Parts-Count DC/DC Converter With Multiple Outputs (Rev. B)		2013/04/23
	Application note	AN-1082 Adjust or Synchronize LM2586/88 Switching Frequency (Rev. B)		2013/04/23
	Application note	AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)		2013/04/23
	Application note	AN-1197 Selecting Inductors for Buck Converters (Rev. B)		2013/04/23
	Application note	AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)		2013/04/23
	Application note	AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)		2013/04/23
	Application note	AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)		2013/04/23
	Application note	AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)		2013/04/23
	Application note	AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)		2013/04/23
	Application note	AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)		2013/04/23
	Application note	Buck Converters Provide a Battery Charger and System Power		2007/03/21
	Application note	Simple Techniques Minimize Cross-Coupling in Distributed Power Systems		2007/03/21
	Application note	Input and Output Capacitor Selection		2005/09/19
	More literature	SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations		2005/07/12
	Application note	AN-643 EMI/RFI Board Design (Rev. B)		2004/05/03

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM2596S-ADJEVM — LM2596 스텝다운 컨버터 평가 모듈

The LM2596S-ADJEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM2596 step-down converter. The EVM operates from an 7V to 40V input and provides a 5V output at 3A.

사용 설명서: PDF