홈 오디오 오디오 증폭기 스피커 증폭기
홈
오디오
오디오 증폭기
스피커 증폭기

LM48520

활성

통합 부스트 및 EMI 확산 스펙트럼을 지원하는 2.7W, 스테레오, 아날로그 입력 클래스 D 오디오 증폭기

지금 주문
데이터 시트

LM48520

활성
데이터 시트 지금 주문

제품 상세 정보

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 8 Output power (W) 1.3 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 8 Control interface GPIO Analog supply (min) (V) 2.6 Analog supply voltage (max) (V) 5 PSRR (dB) 82 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 8 Output power (W) 1.3 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 8 Control interface GPIO Analog supply (min) (V) 2.6 Analog supply voltage (max) (V) 5 PSRR (dB) 82 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • Click and Pop Suppression
  • Low 0.04μA Shutdown Current
  • 78% Efficiency
  • Filterless Class D
  • 2.7V - 5.0V Operation
  • 4 Adjustable Gain Settings
  • Adjustable Output Swing Limiter with Soft Clipping
  • Speaker Protection
  • Short Circuit Protection on Audio Amps
  • Independent Boost and Amplifier Shutdown Pins

Key Specifications

  • Quiescent Power Supply Current: 11.5 mA(typ)
  • Output Power (RL = 8Ω, THD+N ≤ 1%,
    VDD = 3.3V,PV1 = 5.0V): 1.1 W(typ)
  • Shutdown Current: 0.04 μA(typ)

All trademarks are the property of their respective owners.

  • Click and Pop Suppression
  • Low 0.04μA Shutdown Current
  • 78% Efficiency
  • Filterless Class D
  • 2.7V - 5.0V Operation
  • 4 Adjustable Gain Settings
  • Adjustable Output Swing Limiter with Soft Clipping
  • Speaker Protection
  • Short Circuit Protection on Audio Amps
  • Independent Boost and Amplifier Shutdown Pins

Key Specifications

  • Quiescent Power Supply Current: 11.5 mA(typ)
  • Output Power (RL = 8Ω, THD+N ≤ 1%,
    VDD = 3.3V,PV1 = 5.0V): 1.1 W(typ)
  • Shutdown Current: 0.04 μA(typ)

All trademarks are the property of their respective owners.

The LM48520 integrates a boost converter with a high efficiency Class D stereo audio power amplifier to provide up to 1W/ch continuous power into an 8Ω speaker when operating from 2.7V to 5.0V power supply with boost voltage (PV1) of 5.0V. The LM48520 utilizes a proprietary spread spectrum pulse width modulation technique that lowers RF interference and EMI levels. The Class D amplifier is a low noise, filterless PWM architecture that eliminates the output filter, reducing external component count, board area, power consumption, system cost, and simplifying design.

The LM48520 is designed for use in mobile phones and other portable communication devices. The high (78%) efficiency extends battery life when compared to Boosted Class AB amplifiers. The LM48520 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). Also, external leakage is minimized via control of the ground reference via the SW-OUT pin .

The LM48520 has 4 gain options which are pin selectable via Gain0 and Gain1 pins. Output short circuit prevents the device from damage during fault conditions. Superior click and pop suppression eliminates audible transients during power-up and shutdown.

The LM48520 integrates a boost converter with a high efficiency Class D stereo audio power amplifier to provide up to 1W/ch continuous power into an 8Ω speaker when operating from 2.7V to 5.0V power supply with boost voltage (PV1) of 5.0V. The LM48520 utilizes a proprietary spread spectrum pulse width modulation technique that lowers RF interference and EMI levels. The Class D amplifier is a low noise, filterless PWM architecture that eliminates the output filter, reducing external component count, board area, power consumption, system cost, and simplifying design.

The LM48520 is designed for use in mobile phones and other portable communication devices. The high (78%) efficiency extends battery life when compared to Boosted Class AB amplifiers. The LM48520 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). Also, external leakage is minimized via control of the ground reference via the SW-OUT pin .

The LM48520 has 4 gain options which are pin selectable via Gain0 and Gain1 pins. Output short circuit prevents the device from damage during fault conditions. Superior click and pop suppression eliminates audible transients during power-up and shutdown.
filter 기타 스피커 증폭기 찾기
다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet LM48520 Boostd Stere Clas D Audio Pwr Amp w/Output Spkr Prot & Spread Spectrum datasheet (Rev. C) 2013/04/05

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​