OPA2890

활성

비활성화를 지원하는 듀얼 250MHz, 저전력, 광대역, 전압 피드백 연산 증폭기

지금 주문

데이터 시트

document-pdfAcrobat Low-Power, Wideband, Voltage-Feedback Operational Amplifier with Disable datasheet (Rev. C) (영어)

OPA2890

활성

데이터 시트

지금 주문

제품 상세 정보

Architecture

Voltage FB

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

12

GBW (typ) (MHz)

250

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

400

Vn at flatband (typ) (nV√Hz)

8

Vn at 1 kHz (typ) (nV√Hz)

8

Iq per channel (typ) (mA)

1.1

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

No

Features

Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

68

Input bias current (max) (pA)

1600000

Offset drift (typ) (µV/°C)

35

Iout (typ) (mA)

40

2nd harmonic (dBc)

84

3rd harmonic (dBc)

89

Frequency of harmonic distortion measurement (MHz)

1

Architecture

Voltage FB

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

12

GBW (typ) (MHz)

250

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

400

Vn at flatband (typ) (nV√Hz)

8

Vn at 1 kHz (typ) (nV√Hz)

8

Iq per channel (typ) (mA)

1.1

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

No

Features

Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

68

Input bias current (max) (pA)

1600000

Offset drift (typ) (µV/°C)

35

Iout (typ) (mA)

40

2nd harmonic (dBc)

84

3rd harmonic (dBc)

89

Frequency of harmonic distortion measurement (MHz)

1

SOIC (D)

8

29.4 mm² 4.9 x 6

VSSOP (DGS)

10

14.7 mm² 3 x 4.9

FLEXIBLE SUPPLY RANGE:
+3V to +12V Single Supply
±1.5V to ±6V Dual Supplies
UNITY-GAIN STABLE
WIDEBAND +5V OPERATION: 90MHz
(G = 2V/V)
OUTPUT VOLTAGE SWING: ±4.1V
HIGH SLEW RATE: 400V/µs
LOW QUIESCENT CURRENT: 1.1mA/ch
LOW DISABLE CURRENT: 30µA/ch
APPLICATIONS
- VIDEO LINE DRIVING
- xDSL LINE DRIVERS/RECEIVERS
- HIGH-SPEED IMAGING CHANNELS
- ADC BUFFERS
- PORTABLE INSTRUMENTS
- TRANSIMPEDANCE AMPLIFIERS
- ACTIVE FILTERS

All other trademarks are the property of their respective owners

FLEXIBLE SUPPLY RANGE:
+3V to +12V Single Supply
±1.5V to ±6V Dual Supplies
UNITY-GAIN STABLE
WIDEBAND +5V OPERATION: 90MHz
(G = 2V/V)
OUTPUT VOLTAGE SWING: ±4.1V
HIGH SLEW RATE: 400V/µs
LOW QUIESCENT CURRENT: 1.1mA/ch
LOW DISABLE CURRENT: 30µA/ch
APPLICATIONS
- VIDEO LINE DRIVING
- xDSL LINE DRIVERS/RECEIVERS
- HIGH-SPEED IMAGING CHANNELS
- ADC BUFFERS
- PORTABLE INSTRUMENTS
- TRANSIMPEDANCE AMPLIFIERS
- ACTIVE FILTERS

All other trademarks are the property of their respective owners

The OPA2890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities give exceptional single-supply operation. Using a single +5V supply, the OPA2890 can deliver a 0.9V to 4.1V output swing with over 30mA drive current and 210MHz bandwidth. This combination of features makes the OPA2890 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver.

The low 1.1mA/ch supply current of the OPA2890 is precisely trimmed at +25°C. This trim, along with low temperature drift, ensures lower maximum supply current than competing products. System power may be reduced further using the optional disable control pin (MSOP-10 package only). Leaving this disable pin open, or holding it high, operates the OPA2890 normally. If pulled low, the OPA2890 supply current drops to less than 30µA/ch while the output goes into a high-impedance state.

The OPA2890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities give exceptional single-supply operation. Using a single +5V supply, the OPA2890 can deliver a 0.9V to 4.1V output swing with over 30mA drive current and 210MHz bandwidth. This combination of features makes the OPA2890 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver.

The low 1.1mA/ch supply current of the OPA2890 is precisely trimmed at +25°C. This trim, along with low temperature drift, ensures lower maximum supply current than competing products. System power may be reduced further using the optional disable control pin (MSOP-10 package only). Leaving this disable pin open, or holding it high, operates the OPA2890 normally. If pulled low, the OPA2890 supply current drops to less than 30µA/ch while the output goes into a high-impedance state.

filter

기타 고속 연산 증폭기(GBW ≥ 50MHz) 찾기

다운로드