TMUXHS4512
- Supports USB4 up to 20Gbps, DisplayPort 1.4/2.1 up to UHBR20
- Data rate support up to 20Gbps
- High-speed path supports common-mode voltage range of 0V to 1.0V
- Low RON of 8.8Ω typical for high-speed data pins
- –3dB differential BW of 13.0GHz for high-speed data pins
- Excellent dynamic characteristics at 10GHz:
- Insertion loss: –2.5dB
- Return loss: –13dB
- Cross talk: –30dB
- All sideband signals can pass-through up to 1.8V levels and are 5.5V tolerant
- Support 1.2V, 1.8V and 3.3V control logic
- Single supply voltage of 1.8V
- Low active (500µA) and standby power (2µA)
- IOFF protection that prevents current leakage when supply rail collapsed (VCC = 0V)
- Temperature range: –40°C to 125°C
- Package: 40-pin, 3mm × 6mm, 0.4mm pitch WQFN
The TMUXHS4512 is a high-speed bidirectional passive switch in mux or demux configurations. The device is protocol agnostic supporting many applications including USB4, Thunderbolt3/4, and DisplayPort 1.4 / 2.1. The TMUXHS4512 is a generic analog differential passive mux or demux that works for many high-speed differential interfaces with data rates up to 20Gbps. The TMUXHS4512 high-speed channels support differential signaling and single-ended signaling as long as the single-ended signals do not violate VP-N_ABSMAX parameter. The sideband channels are 5V tolerant and support single-ended and differential signaling such as I2C, UART, DisplayPort AUX, and USB2, just to name few. The dynamic characteristics of the high-speed channel allows high-speed switching with minimal attenuation to the signal eye diagram and with very little added jitter. The silicon design of the device is optimized for excellent frequency response at higher frequency spectrum of the signals. The device supports differential signaling with common-mode voltage range (CMV) of 0V to 1.0V in the Dxx datapaths.
The TMUXHS4512 consumes very low active power of 500µA. The device also offers a power-down mode in which all channels become Hi-Z and the device operates with minimal power of just 2µA.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMUXHS4612-EVM — TMUXHS4612 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
WQFN (RET) | 40 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치