TPS22958
- Integrated N-Channel Load Switch
- Input Voltage Range: 0.6 V to 5.5 V
- VBIAS Voltage Range: 2.5 V to 5.5 V
- RON Resistance
- RON = 14 mΩ at VIN = 5 V (VBIAS = 5 V)
- RON = 13 mΩ at VIN = 3.3 V (VBIAS = 5 V)
- RON = 13 mΩ at VIN = 1.8 V (VBIAS = 5 V)
- 4 A Maximum Continuous Switch Current (DGK Package)
- 6 A Maximum Continuous Switch Current (DGN Package)
- Low Quiescent Current
- 55 µA at VBIAS = 5 V
- Low Control Input Threshold Enables Use of
1.2 V/1.8 V/2.5 V/3.3 V Logic - Adjustable Rise Time(1)
- Quick Output Discharge (QOD)(2)
- DGK 8-Pin Package:
- 3.0 mm x 4.9 mm x 1.1 mm and 0.65 mm pitch
- DGN 8-Pin Package with Thermal Pad:
- 3.0 mm x 4.9 mm x 1.1 mm and 0.65 mm pitch
- ESD Performance Tested per JEDEC STD.
- 2-kV HBM and 1-kV CDM
- Latch-Up Performance Exceeds 100 mA per JESD 78, Class II
- GPIO Enable – Active High See section for CT value vs. rise time Not featured in the TPS22958N device.
The TPS22958x is a small, single channel load switch with an adjustable rise time. The device contains an N-Channel MOSFET that can operate over an input voltage range of 0.6 V to 5.5 V and can support a maximum continuous current of 4 A (DGK package) or 6 A (DGN package). The switch is controlled by an on/off input, which is capable of interfacing directly with low voltage control signals.
The rise time of the device can be externally controlled in order to avoid inrush current. Attaching a capacitor to the CT pin will change the rise time: increasing the value of the capacitor will increase the rise time. The TPS22958x is available in two space-saving packages (DGK and DGN) with or without a thermal pad for high power dissipation. The device is characterized for operation over the free-air temperature range of -40°C to 105°C.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS22958x 5.5-V, 4-A / 6-A, 14-mΩ Load Switch with Adjustable Rise Time datasheet (Rev. A) | PDF | HTML | 2015/03/27 |
| Application note | Load Switch Thermal Considerations (Rev. A) | 2018/10/11 | ||
| Application note | Basics of Load Switches (Rev. A) | 2018/09/05 | ||
| Application note | Selecting a Load Switch to Replace a Discrete Solution | 2017/04/30 | ||
| Application note | Timing of Load Switches | 2017/04/27 | ||
| Application note | Managing Inrush Current (Rev. A) | 2015/05/28 | ||
| User guide | TPS22958/58N User’s Guide | 2015/03/04 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS22958EVM — TPS22958(DGN 및 DGK) 5.5V 14mΩ 온 저항 부하 스위치 평가 모듈
The TPS22958 device is a single channel low RON load switch with an operating voltage range of 0.6 V to 5.5 V. Both package versions DGK and DGN of the TPS22958 are available on the TPS22958EVM for evaluation. TPS22958DGK supports up to 4-A maximum continuous current. TPS22958DGN supports up to 6-A (...)
TPS22958 Unencrypted PSpice Transient Model Package (Rev. A)
TPS22958N Unencrypted PSpice Transient Model Package (Rev. A)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HVSSOP (DGN) | 8 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.