전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS54202

활성

4.5V~28V 입력, 2A 출력, EMI 친화적 동기 스텝다운 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62932 활성 SOT-583 패키지의 3.8V~30V 입력, 2A, 200kHz~2.2MHz, 저 IQ 동기 벅 컨버터 Wider Vin range, adjustable Fsw in smaller package.

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 2 Vin (min) (V) 4.5 Vin (max) (V) 28 Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 26 Iq (typ) (µA) 40 Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 2 Vin (min) (V) 4.5 Vin (max) (V) 28 Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 26 Iq (typ) (µA) 40 Duty cycle (max) (%) 100
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • 4.5-V to 28-V wide input voltage range
  • Integrated 148-mΩ and 78-mΩ MOSFETs for 2-A, continuous output current
  • Low 2-µA shutdown, 45-µA quiescent current
  • Internal 5-mS soft start
  • Fixed 500-kHz switching frequency
  • Frequency spread spectrum to reduce EMI
  • Advanced Eco-mode™ pulse skip
  • Peak current mode control
  • Internal loop compensation
  • Overcurrent protection for both MOSFETs with hiccup mode protection
  • Overvoltage protection
  • Thermal shutdown
  • SOT-23 (6) package
  • 4.5-V to 28-V wide input voltage range
  • Integrated 148-mΩ and 78-mΩ MOSFETs for 2-A, continuous output current
  • Low 2-µA shutdown, 45-µA quiescent current
  • Internal 5-mS soft start
  • Fixed 500-kHz switching frequency
  • Frequency spread spectrum to reduce EMI
  • Advanced Eco-mode™ pulse skip
  • Peak current mode control
  • Internal loop compensation
  • Overcurrent protection for both MOSFETs with hiccup mode protection
  • Overvoltage protection
  • Thermal shutdown
  • SOT-23 (6) package

The TPS54202 is a 4.5-V to 28-V input voltage range, 2-A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation and 5-ms internal soft start to reduce component count.

By integrating the MOSFETs and employing the SOT-23 package, the TPS54202 achieves the high power density and offers a small footprint on the PCB.

Advanced Eco-mode implementation maximizes the light load efficiency and reduces the power loss.

The frequency spread spectrum operation is introduced for EMI reduction.

Cycle-by-cycle current limit in both high-side MOSFET protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the present time.

The TPS54202 is a 4.5-V to 28-V input voltage range, 2-A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation and 5-ms internal soft start to reduce component count.

By integrating the MOSFETs and employing the SOT-23 package, the TPS54202 achieves the high power density and offers a small footprint on the PCB.

Advanced Eco-mode implementation maximizes the light load efficiency and reduces the power loss.

The frequency spread spectrum operation is introduced for EMI reduction.

Cycle-by-cycle current limit in both high-side MOSFET protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the present time.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS54302 활성 4.5V~28V 입력, 3A 출력, EMI 친화적 동기식 스텝다운 컨버터 Higher current equivalent part.
비교 대상 장치와 유사한 기능
TPSM84203 활성 1.5A, 28V 입력, 3.3V 출력 TO-220 전원 모듈 Simplify your design with an integrated-inductor power module.
TPSM84205 활성 1.5A, 28V 입력, 5V 출력 TO-220 전원 모듈 Simplify your design with an integrated-inductor power module.
TPSM84212 활성 1.5A, 28V 입력, 12V 출력 TO-220 전원 모듈 Simplify your design with an integrated-inductor power module.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
11개 모두 보기
유형 직함 날짜
* Data sheet TPS54202 4.5-V to 28-V Input, 2-A Output, EMI Friendly Synchronous Step Down Converter datasheet (Rev. B) PDF | HTML 2021/04/06
Application note 3-A DC/DC Buck Converter Selection Guide of Mid-Range VIN PDF | HTML 2023/08/03
User guide TPS54202 Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021/10/29
Application note L1 and L2 EV Charger Electric Vehicle Service Equipment Design Considerations (Rev. B) 2021/06/09
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Application note Low Dropout Operation in a Buck Converter (Rev. A) 2019/04/01
Application note Using the TPS54x02 to Create an Inverting Power Supply 2018/06/15
Application note SOT23 Package Thermal Consideration 2018/03/02
Technical article Use an ULQ buck regulator for energy-efficient power products PDF | HTML 2017/09/12
Application note 800VA Pure Sine Wave Inverter's Reference Design (Rev. A) PDF | HTML 2017/08/01
Technical article Powering the next generation of home appliances: How to get more from less PDF | HTML 2016/10/13

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS54202EVM-716 — TPS54202 2A 출력, 동기 스텝 다운 컨버터 평가 모듈

The TPS54202EVM-716 is a fully assembled and tested circuit for evaluating the TPS54202 synchronous step-down SWIFT™ converter. The EVM converts a 8-V to 28-V input voltage to a regulated 5-V output voltage that delivers up to 2 A. The solution offers a ultra-low quiescent supply current (IQ) (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS54202 Unencrypted PSpice Transient Model Package (Rev. C)

SLVMBJ5C.ZIP (102 KB) - PSpice Model
레퍼런스 디자인

TIDA-010250 — 1kW 브러시리스 DC 모터 인버터 레퍼런스 설계

이 레퍼런스 설계는 Arm® Cortex®-M0+ 코어 마이크로컨트롤러인 MSPM0G를 사용한 모터 인버터에 대해 설명합니다. 이 설계는 1-3션트 레지스터를 사용하는 무센서 자속 기준 제어(FOC) 알고리즘을 지원할 뿐만 아니라 홀 또는 직교 인코더 인터페이스(QEI) 센서를 사용한 센서드 모터 구동 알고리즘도 지원합니다. 이 레퍼런스 설계와 함께 제공되는 하드웨어 및 소프트웨어는 테스트를 거쳐 즉시 사용 가능하여 개발 시간과 출시 시간을 단축할 수 있습니다.
Design guide: PDF
레퍼런스 디자인

TIDA-010265 — C2000™ MCU 및 MSPM0을 지원하는 750W 모터 인버터 레퍼런스 설계

이 레퍼런스 설계는 세탁기 또는 그와 유사한 장비를 위한 750W 모터 드라이브로, 플럭스, 각도, 속도 및 토크 옵저버(FAST) 소프트웨어 인코더 또는 eSMO(향상된 슬라이딩 모드 옵저버)를 지원하는 3상 PMSM(영구 자석 동기 모터)를 위한 센서리스 FOC(자속 기준 제어)를 구현하는 방법을 보여줍니다. 모듈식 디자인을 사용하는 이 레퍼런스 설계는 동일한 마더보드에서 C2000™ 마이크로컨트롤러(MCU) 및 MSPM0 MCU 도터 보드를 모두 지원합니다. 이 레퍼런스 설계와 함께 제공되는 하드웨어 및 소프트웨어는 테스트를 (...)
Design guide: PDF
레퍼런스 디자인

TIDA-00946 — 듀얼 레이어 TO-220 폼 팩터에 5V 1A, 저 EMI, 94% 효율 DC/DC 모듈 레퍼런스 디자인

This reference design demonstrates a 10.5-mm x 14.5-mm, 94% efficiency, low electromagnetic interference (EMI) DC/DC module with the TPS54202, replacing a low-dropout regulator (LDO) in major home appliance applications. High efficiency eliminates the need of heat sink for a smaller and (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00947 — 듀얼 레이어 TO-220 폼 팩터에 3.3V 1A, 저 EMI, 92% 효율 DC/DC 모듈 레퍼런스 디자인

This reference design demonstrates a 10.5 mm x1 4.5 mm, 92% efficiency, low-electromagnetic interference (EMI) DC/DC module with the TPS54202, replacing a low dropout regulator (LDO) in major home appliance applications. The high efficiency eliminates the need of heat sink for a design that (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00948 — 단일 계층 TO-247 폼 팩터에서 5V 1A, 저 EMI, 94% 효율 DC/DC 모듈 레퍼런스 디자인

This reference design demonstrates a 15 mm x 20 mm, 94% efficiency, low electromagnetic interference (EMI) DC/DC module with the TPS54202, replacing low dropout regulator (LDO) in major home appliance applications. High efficiency eliminates the need of heat sink for a smaller design and and (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00776 — 98% 이상의 효율과 소형 폼 팩터를 갖춘 범용 350W CCM PFC 레퍼런스 디자인

The TIDA-00776 design  is a 350-W cost competitive power factor regulator converter designed for refrigerators and other appliances applications. This reference design is a Continuous-Conduction-Mode (CCM) boost converter that uses TI’s UCC28180 PFC controller and has all the necessary (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

PMP30825 — 150VDC~430VDC 입력, 다중 출력 밸리 스위칭 플라이백 레퍼런스 설계

This 10-W non-isolated flyback reference design uses the UCC28742 controller to generate four outputs (5 V at 150 mA, 12 V at 690 mA, 15 V at 80 mA, 18 V at 20 mA). The controller provides constant-voltage and constant-current regulation. Transistors are used in place of an optocoupler feedback (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010055 — 보호 릴레이 모듈을 위한 진단 기능이 포함된 비절연 전원 아키텍처 레퍼런스 설계

This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00949 — 단일 계층 TO-247 폼 팩터에서 3.3V 1A, 저 EMI, 92% 효율 DC/DC 모듈 레퍼런스 디자인

This reference design demonstrates a 15 mm x 20 mm, 92% efficiency, low electromagnetic interference (EMI) DC/DC module with TPS54202, replacing low dropout regulator (LDO) in major home appliance applications. The high efficiency eliminates the need of heat sink for a smaller and cheaper (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01586 — 데이/나이트 비전을 포함하는 IP 네트워크 카메라용 IR LED 조명 및 ICR 제어 레퍼런스 설계

This reference design showcases an Infrared LED illumination sub-system for Internet Protocol (IP) network cameras with day and night vision. The system features a cut filter control, LED dimming, ambient light measuring and ballasting for current of each IR LED string. Ballasting is an (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23-THN (DDC) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상