TPS54519

Name: TPS54519
Brand: TI
SKU: TPS54519
Price: 0.792 USD

활성

2.95V~6V 입력, 5A 동기형 스텝다운 컨버터

지금 주문

데이터 시트

document-pdfAcrobat 2.95-V to 6-V Input, 5-A Synchronous Step Down SWIFT Converter datasheet (Rev. A) (영어)

TPS54519

활성

데이터 시트

지금 주문

제품 상세 정보

Rating

Catalog

Operating temperature range (°C)

-40 to 140

Topology

Buck

Type

Converter

Iout (max) (A)

5

Vin (min) (V)

2.95

Vin (max) (V)

6

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

2000

Features

Enable, Forced PWM, Frequency synchronization, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking

Control mode

current mode

Vout (min) (V)

0.6

Vout (max) (V)

4.5

Iq (typ) (µA)

455

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 140

Topology

Buck

Type

Converter

Iout (max) (A)

5

Vin (min) (V)

2.95

Vin (max) (V)

6

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

2000

Features

Enable, Forced PWM, Frequency synchronization, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking

Control mode

current mode

Vout (min) (V)

0.6

Vout (max) (V)

4.5

Iq (typ) (µA)

455

Duty cycle (max) (%)

100

WQFN (RTE)

16

9 mm² 3 x 3

Two 30 mΩ (typical) MOSFETs for high efficiency
at 5-A loads
200kHz to 2MHz Switching Frequency
0.6 V Voltage Reference With ± 1% Initial Accuracy
Adjustable Slow Start / Sequencing
UV and OV Power Good Output
Low Operating and Shutdown Quiescent Current
Safe Start-up into Pre-Biased Output
Cycle by Cycle Current Limit, Thermal and Frequency
Fold Back Protection
–40°C to 140°C Operating Junction
Temperature Range
Thermally Enhanced 3mm × 3mm 16-pin QFN

Two 30 mΩ (typical) MOSFETs for high efficiency
at 5-A loads
200kHz to 2MHz Switching Frequency
0.6 V Voltage Reference With ± 1% Initial Accuracy
Adjustable Slow Start / Sequencing
UV and OV Power Good Output
Low Operating and Shutdown Quiescent Current
Safe Start-up into Pre-Biased Output
Cycle by Cycle Current Limit, Thermal and Frequency
Fold Back Protection
–40°C to 140°C Operating Junction
Temperature Range
Thermally Enhanced 3mm × 3mm 16-pin QFN

The TPS54519 device is a full featured 6 V, 5 A, synchronous step down current mode converter with two integrated MOSFETs.

The TPS54519 enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2 MHz switching frequency, and minimizing the IC footprint with a small 3mm × 3mm thermally enhanced QFN package.

Efficiency is maximized through the integrated 30mΩ MOSFETs and 350µA typical supply current. Using the enable pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.

Under voltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the slow start pin. An open drain power good signal indicates the output is within 93% to 107% of its nominal voltage.

Frequency fold back and thermal shutdown protects the device during an overcurrent condition.

The TPS54519 is supported in the SwitcherPro Software Tool at www.ti.com/switcherpro.

For more SWIFT documentation, see the TI website at www.ti.com/swift.

The TPS54519 device is a full featured 6 V, 5 A, synchronous step down current mode converter with two integrated MOSFETs.

The TPS54519 enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2 MHz switching frequency, and minimizing the IC footprint with a small 3mm × 3mm thermally enhanced QFN package.

Efficiency is maximized through the integrated 30mΩ MOSFETs and 350µA typical supply current. Using the enable pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.

Under voltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the slow start pin. An open drain power good signal indicates the output is within 93% to 107% of its nominal voltage.

Frequency fold back and thermal shutdown protects the device during an overcurrent condition.

The TPS54519 is supported in the SwitcherPro Software Tool at www.ti.com/switcherpro.

For more SWIFT documentation, see the TI website at www.ti.com/swift.

filter

기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

3개 모두 보기

	유형	직함	날짜
*	Data sheet	2.95-V to 6-V Input, 5-A Synchronous Step Down SWIFT Converter datasheet (Rev. A)	2013/12/13
	Selection guide	Buck Converter Quick Reference Guide (Rev. B)	2021/04/08
	User guide	TPS54519EVM-037, 5-A, SWIFT(TM) Regulator Evaluation Module	2011/08/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS54478EVM-037 — 프리바이어스 시동이 포함된 TPS54478 동기 스텝다운 컨버터용 평가 모듈

The TPS54478EVM-037 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS54478 Synchronous Step-Down Switcher. The EVM operates from a 3V to 6V supply and provides a 1.8V output at 4A.

사용 설명서: PDF

TI.com에서 구매 불가

평가 보드

TPS54519EVM-037 — TPS54519 동기 스텝다운 컨버터용 평가 모듈

The TPS54519EVM-037 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS54519 Synchronous Step-Down Converter. The EVM operates from a 3V to 6V supply and provides a 1.8V output at 5A.

사용 설명서: PDF