TPS62933F
- Configured for a wide range of applications
- 3.8-V to 30-V input voltage range
- 0.8-V to 22-V output voltage range
- Ultra-low quiescent current: 12 µA (TPS62932, TPS62933, and TPS62933P)
- Integrated 76-mΩ and 32-mΩ MOSFETs
- 0.8 V ± 1% reference voltage (25°C)
- Maximum 98% duty cycle operation
- Precision EN threshold
- 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current
- –40°C to 150°C operating junction temperature
- Numerous pin-compatible options
- TPS62932, TPS62933, and TPS62933F with the SS pin for adjustable soft-start time
- TPS62933P and TPS62933O with the PG pin for a power-good indicator
- TPS62932, TPS62933, and TPS62933P with pulse frequency modulation (PFM) for high light-load efficiency
- TPS62933F with forced continuous current modulation (FCCM)
- TPS62933O with out-of-audio (OOA) feature
- Ease of use and small solution size
- Peak current control mode with internal compensation
- 200-kHz to 2.2-MHz selectable frequency
- EMI friendly with frequency spread spectrum (TPS62932, TPS62933, TPS62933P and TPS62933O)
- Supports start-up with prebiased output
- Cycle-by-cycle OC limit for both high-side and low-side MOSFETs
- Non-latched protections for OTP, OCP, OVP, UVP, and UVLO
- 1.6-mm × 2.1-mm SOT583 package
- Create a custom design with the TPS6293x using the WEBENCH Power Designer
The TPS6293x is a high-efficiency, easy-to-use synchronous buck converter with a wide input voltage range of 3.8 V to 30 V, and supports up to 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current and 0.8-V to 22-V output voltage.
The device employs fixed-frequency peak current control mode for fast transient response and good line and load regulation. The optimized internal loop compensation eliminates external compensation components.
The TPS62932, TPS62933, and TPS62933P operate in pulse frequency modulation for high light load efficiency. The TPS62933F operates in forced continuous current modulation which maintains lower output ripple during all load conditions. The TPS62933O operates in out of audio mode to avoid audible noise.
The ULQ (ultra-low quiescent) feature is beneficial for long battery lifetime. The switching frequency can be set by the configuration of the RT pin in the range of 200 kHz to 2.2 MHz, which can optimize system efficiency, solution size, and bandwidth. The soft-start time of the TPS62932, TPS62933, and TPS62933F can be adjusted by the external capacitor at the SS pin. The TPS62932, TPS62933, TPS62933P and TPS62933O are featured with frequency spread spectrum, which helps with lowering down EMI noise.
The TPS6293x is in a small SOT583 (1.6 mm × 2.1 mm) package with 0.5-mm pin pitch, and has an optimized pinout for easy PCB layout and promotes good EMI performance.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS6293x 3.8-V to 30-V, 2-A, 3-A Synchronous Buck Converters in a SOT583 Package datasheet (Rev. D) | PDF | HTML | 2022/08/08 |
| Application note | Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part I: Filter Design for Out | PDF | HTML | 2024/02/27 | |
| Application note | Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part II: Hybrid Sense Network | PDF | HTML | 2024/02/27 | |
| Application note | Create an Inverting Power Supply Using a TPS6293x Buck Converter With Internal Compensation (Rev. A) | PDF | HTML | 2023/12/13 | |
| Application note | Designing a Simple and Low-Cost Flybuck Solution With the TPS62933F | PDF | HTML | 2022/12/16 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62933EVM — 3.8V~30V, 3A, 200kHz~2.2MHz 동기 벅 컨버터 TPS62933 평가 모듈
TIDA-050073 — 2단계 필터 레퍼런스 설계를 지원하는 3.8V~30V 입력, 3A, 1.2V 저출력 리플 전원 공급 장치
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-5X3 (DRL) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치