TPS708

활성

전원 양호 및 독립 활성화를 지원하는 250mA, 듀얼 채널 저손실 전압 레귤레이터

지금 주문

데이터 시트

document-pdfAcrobat Dual-Output Low-Dropout Voltage Regulators datasheet (Rev. D) (영어)

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

비교 대상 장치와 유사한 기능

TPS7A87

활성

500mA, 저잡음, 높은 PSRR, 듀얼 채널 조정 가능 초저 손실 전압 레귤레이터 Alternative dual LDO with ultra-low-noise performance in a 4-mm x 4-mm WQFN package.

TPS708

활성

데이터 시트

지금 주문

제품 상세 정보

Output options

Adjustable Output, Dual output, Fixed Output

Iout (max) (A)

0.25

Vin (max) (V)

6

Vin (min) (V)

2.7

Vout (max) (V)

5.5

Vout (min) (V)

1.2

Fixed output options (V)

1.2, 1.5, 1.8, 2.5, 3.3

Rating

Catalog

Noise (µVrms)

65

PSRR at 100 KHz (dB)

20

Iq (typ) (mA)

0.19

Thermal resistance θJA (°C/W)

32

Load capacitance (min) (µF)

10

Regulated outputs (#)

2

Features

Enable, Output discharge, Power good

Accuracy (%)

2

Dropout voltage (Vdo) (typ) (mV)

83

Operating temperature range (°C)

-40 to 125

Output options

Adjustable Output, Dual output, Fixed Output

Iout (max) (A)

0.25

Vin (max) (V)

6

Vin (min) (V)

2.7

Vout (max) (V)

5.5

Vout (min) (V)

1.2

Fixed output options (V)

1.2, 1.5, 1.8, 2.5, 3.3

Rating

Catalog

Noise (µVrms)

65

PSRR at 100 KHz (dB)

20

Iq (typ) (mA)

0.19

Thermal resistance θJA (°C/W)

32

Load capacitance (min) (µF)

10

Regulated outputs (#)

2

Features

Enable, Output discharge, Power good

Accuracy (%)

2

Dropout voltage (Vdo) (typ) (mV)

83

Operating temperature range (°C)

-40 to 125

HTSSOP (PWP)

20

41.6 mm² 6.5 x 6.4

Dual Output Voltages for Split-Supply Applications
Independent Enable Functions (See Part Number TPS707xx for Sequenced Outputs)
Output Current Range of 250 mA on Regulator 1 and 125 mA on Regulator 2
Voltage Options: 3.3-V/2.5-V, 3.3-V/1.8-V, 3.3-V/1.5-V, 3.3-V/1.2-V, and Dual Adjustable Outputs
Open Drain Power-On Reset with 120-ms Delay
Open Drain Power Good for Regulator 1 and Regulator 2
Ultralow 190-µA (typ) Quiescent Current
1-µA Input Current During Standby
Low Noise: 65 µV_RMS Without Bypass Capacitor
Quick Output Capacitor Discharge Feature
One Manual Reset Input
2% Accuracy Over Load and Temperature
Undervoltage Lockout (UVLO) Feature
20-Pin PowerPAD™ TSSOP Package
Thermal Shutdown Protection

PowerPAD Is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

Dual Output Voltages for Split-Supply Applications
Independent Enable Functions (See Part Number TPS707xx for Sequenced Outputs)
Output Current Range of 250 mA on Regulator 1 and 125 mA on Regulator 2
Voltage Options: 3.3-V/2.5-V, 3.3-V/1.8-V, 3.3-V/1.5-V, 3.3-V/1.2-V, and Dual Adjustable Outputs
Open Drain Power-On Reset with 120-ms Delay
Open Drain Power Good for Regulator 1 and Regulator 2
Ultralow 190-µA (typ) Quiescent Current
1-µA Input Current During Standby
Low Noise: 65 µV_RMS Without Bypass Capacitor
Quick Output Capacitor Discharge Feature
One Manual Reset Input
2% Accuracy Over Load and Temperature
Undervoltage Lockout (UVLO) Feature
20-Pin PowerPAD™ TSSOP Package
Thermal Shutdown Protection

PowerPAD Is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

The TPS708xx is a low dropout voltage regulator with integrated SVS (RESET, POR, or power on reset) and power good (PG) functions. These devices are capable of supplying 250 mA and 125 mA by regulator 1 and regulator 2 respectively. Quiescent current is typically 190 µA at full load. Differentiated features, such as accuracy, fast transient response, SVS supervisory circuit (power on reset), manual reset input, and independent enable functions provide a complete system solution.

The TPS708xx family of voltage regulators offers very low dropout voltage and dual outputs. These devices have extremely low noise output performance without using any added filter bypass capacitors and are designed to have a fast transient response and be stable with 10-µF low ESR capacitors.

These devices have fixed 3.3-V/2.5-V, 3.3-V/1.8-V, 3.3-V/1.5-V, 3.3-V/1.2-V, and adjustable voltage options. Regulator 1 can support up to 250 mA, and regulator 2 can support up to 125 mA. Separate voltage inputs allow the designer to configure the source power.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 170 mV on regulator 1) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (maximum of 230 µA over the full range of output current and full range of temperature). This LDO family also features a sleep mode; applying a high signal to EN1 or EN2 (enable) shuts down regulator 1 or regulator 2, respectively. When a high signal is applied to both EN1 and EN2, both regulators enter sleep mode, thereby reducing the input current to 2 µA at T_J = +25°C.

For each regulator, there is an internal discharge transistor to discharge the output capacitor when the regulator is turned off (disabled).

The PG1 pin reports the voltage condition at V_OUT1. The PG1 pin can be used to implement a SVS (RESET, POR, or power on reset) for the circuitry supplied by regulator 1. The PG2 pin reports the voltage conditions at V_OUT2. The PG2 pin can be used to implement a SVS (power on reset) for the circuitry supplied by regulator 2.

The TPS708xx features a RESET (SVS, POR, or power on reset). RESET output initiates a reset in the event of an undervoltage condition. RESET also indicates the status of the manual reset pin (MR). When MR is in the logic high state, RESET goes to a high impedance state after a 120-ms delay. To monitor V_OUT1, the PG1 output pin can be connected to MR. To monitor V_OUT2, the PG2 output pin can be connected to MR.

The device has an undervoltage lockout UVLO circuit that prevents the internal regulators from turning on until V_IN1 reaches 2.5V.