비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품
TPS7H1101-SP
- 5962R13202:
- Radiation Hardness Assurance (RHA) up to TID 100 krad (Si)
- Total Ionizing Dose 100 krad (Si)
- ELDRS-Free 100 krad (Si)
- Dose Rate 10 mRAD (si)/s
- Single Event Latchup (SEL) Immune to LET = 85 MeV-cm2/mg
- SEB and SEGR Immune to LET = 85 MeV-cm2/mg
- SET/SEFI Onset Threshold > 40 MeV-cm2/mg, See Radiation Report for Details
- Specifically Designed to Always Upset Low to Avoid Damage to Critical Downstream Component
- SET/SEFI Cross-Section Plot, See Radiation Report for Details
- Ultra-Low VIN Range: 1.5 V to 7 V
- 3-A Maximum Output Current
- Current Share/Parallel Operation to Provide up to 6-A Output Current
- Stable With Ceramic Output Capacitor
- ±2% Accuracy Over Line, Load, and Temperature
- Programmable Soft-Start Through External Capacitor
- Input Enable and Power-Good Output for Power Sequencing
- Ultra-Low Dropout LDO Voltage: 62 mV at 1 A (25°C), VOUT = 1.8 V
- Low Noise: 20.33 µVRMS VIN = 2 V, VOUT = 1.8 V at 3 A
- PSRR: Over 45 dB at 1 kHz
- Excellent Load/Line Transient Response
- Foldback Current Limit
- See the Tools & Software Tab
- Thermally-Enhanced CFP Package (0.6°C/W RθJC)
The TPS7H1101-SP is a radiation-hardened LDO linear regulator that uses a PMOS pass element configuration. This device operates over a wide range of input voltage, from 1.5 V to 7 V while offering excellent PSRR. The TPS7H1101-SP features a precise and programmable foldback current limit implementation with a very-wide adjustment range. To support the complex power requirements of FPGAs, DSPs, or microcontrollers, the TPS7H1101-SP provides enable on and off functionality, programmable SoftStart, current sharing capability, and a PowerGood open-drain output.
The TPS7H1101-SP is available in a thermally-enhanced 16-pin ceramic flatpack package (CFP).
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7H1101SPEVM — TPS7H1101SPEVM 평가 모듈
The TPS7H1101-SP is a Ultra Low Dropout (LDO) linear regulator that uses a PMOS pass element configuration. The techniques employed allow for very low dropout. With an improved circuitry the TPS7H1101 operates under wide range of input voltage, from 1.5 V to 7 V which enables 6-V IN to 5-V OUT or (...)
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
CFP (HKR) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치